MS2N07-C0BQL-BMVH1-NNNNN-NN

Product Description:

This MS2N07-C0BQL-BMVH1-NNNNN-NN synchronous servomotor by Bosch Rexroth Indramat cannot be used without a drive controller. The motor’s shaft does not have a shaft sealing ring. This product houses a smooth shaft in its design. The device has no gearboxes mounted on its shaft. This unit’s shaft must be kept free of fluids like gear oil and coolant lubricants. Its drive end side of the shaft may be displaced by 0.6 mm with respect to the housing because of thermal expansion. The motor is equipped with a permanent brake.

This product has to be adapted to the drive elements as well as the machine construction. The device features a centering collar of size 130 mm. This unit’s square frame has four mounting holes. It is ideal for applications with maximum acceleration capacity. The motor depicts a standard speed according to the winding designations. This product uses two systems to monitor its temperature. The device’s output temperature is based on the encoder variant. The unit portrays a water-cooled design. It is necessary to equip the components of the cooling system with a potential equalization.

This motor’s encoder fulfills SIL 2 and Category 3, PL.d safety specifications. The product has no special design. This device encompasses standard bearings. The unit has an N tolerance class. It has fixed and floating bearings on the non-drive end and drive end respectively. The synchronous servomotor’s availability is largely determined by the lifetime of its bearings. This product’s shaft and bearings are affected by radial and axial forces when in use. The device installation is allowed in any position. This unit’s safety notes, open connectors, and type plates must be protected when it is coated with an additional layer of paint. It has no air-pressure connection kit.