MS2N07-C0BNN-DMSH0-NNNNN-NN
Wake Industrial LLC is not an authorized distributor of this product.
MPN: R914501749
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
The MS2N07-C0BNN-DMSH0-NNNNN-NN synchronous servo motor offers natural surface cooling, a rated power of 1.2 kW, a rated torque of 3.8 Nm, and IP65 protection. Part of the MS2N Synchronous Servo Motors by Bosch Rexroth Indramat, it features a digital multi-turn absolute encoder and operates at a rated speed of 3000 rpm.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
MS2N07-C0BNN-DMSH0-NNNNN-NN is a Bosch Rexroth servo motor. It belongs to the MS2N series of synchronous motors that require 3-phase input at 400 to 480 Volts. Direct connection to the AC supply is not allowed, and the motor must obtain AC power from a Bosch servo drive. Operating conditions have a significant effect on motor operation. For operation, the optimal conditions include 0 to 40 ⁰C temperature, 0 to 1000 meters elevation, and 5 to 95% relative humidity. The radial vibrations must not exceed 50 m/s2 at the bearing shield and the axial vibrations must not exceed 25 m/s2 at the bearing shield. Use of MS2N motors with third-party drives is permitted. However, the drive must support pulse-width modulation with 4 to 16 kilohertz pulse frequency. For transport, the temperature should be between -25 and 70 ⁰C with 5 to 75% humidity.
For storage, the temperature should be between -25 and 55 ⁰C with 5 to 75% humidity. MS2N07-C0BNN-DMSH0-NNNNN-NN supports self-cooling and features the most advanced encoder that is available for MS2N motors. This is a high-performance multiturn encoder with 24-bit resolution. This optical absolute value encoder enables accurate control of motor parameters such as speed and position. A single cable carries power, feedback, and control signals between the motor and the servo drive. Single cable technology allows faster and cost-effective installation and motor operation. The motor shaft end is smooth. The shaft is without the optional seal, which gives a protection rating of IP64 to the motor. The motor housing is therefore dustproof. However, is it only safe from water splashes and cannot provide protection against water from jets or from submersion in water. Nominal speed rating of the MS2N07-C0BNN-DMSH0-NNNNN-NN motor is 2650 RPM.
Frequently Asked Questions about MS2N07-C0BNN-DMSH0-NNNNN-NN:
Q: Which cooling method does the motor use?
A: The motor is designed for self-cooling.
Q: Which type of magnets are used on the motor?
A: Permanent magnets are used on the motor.
Q: What is the operating temperature?
A: The operating temperature range is 0 to 40 ⁰C.
Q: What is the weight of the motor?
A: Weight of the motor is 12 kilograms.
Q: Which bearings are used on the motor?
A: Standard bearings are used on the motor.
