MS2N07-C0BNN-BSUH0-NNNNN-GM140N1007AN-NN

Product Description:

The MS2N07-C0BNN-BSUH0-NNNNN-GM140N1007AN-NN motor sits in the MS2N Synchronous Servo Motors lineup by Bosch Rexroth Indramat and has a reputation for lasting through demanding work cycles. This servo motor gives a rated speed of 3000 rpm with a rated torque of 6.9 Nm, a combination made for setups that don’t slow down. The body is finished with IP65 protection along with a shaft seal, giving toughness in places where dust and splashing liquids are always a risk. Across automation lines or robotic settings, the natural convection cooling system takes away extra heat on its own, leaving the motor to handle longer runs without relying on external fans.

Self-cooling makes this unit an easy fit when things get cramped or airflow is limited. There’s an EnDat 2.2 encoder on board, giving both absolute and relative feedback, so positioning stays sharp whether high or low speeds are needed. At 7.5 A rated current and 2.17 kW rated power, connection can slot right in with most industrial drives. The rotatable connector adds a bit of flexibility during wire-up, cutting down install time since awkward angles or tight cabinets don’t slow things much. This motor lands with an S1 (Continuous duty) cycle, so it won’t let up if the job takes all day.

Out of the box, the MS2N07-C0BNN-BSUH0-NNNNN-GM140N1007AN-NN stands solid because of that 0.00140 kg·m² rotor moment of inertia, useful when smooth acceleration or deceleration matters. A maximum torque of 30 Nm provides the kind of twice-the-usual force needed for jams or hard reversals. Its balanced build targets precise axes or station positions, yet has enough margin to stand up to rough handling. In industrial automation, where downtime and surprises get expensive, this servo motor slots into place as a reliable pick that works quietly behind the scenes.