MS2N07-C0BNN-ASUK0-NNNNN-NN
Wake Industrial LLC is not an authorized distributor of this product.
MPN: R911390104
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
The MS2N07-C0BNN-ASUK0-NNNNN-NN is a synchronous servo motor manufactured by Bosch Rexroth Indramat. It is part of the MS2N Synchronous Servo Motors series, featuring a rated power of 0.75 kW and a rated speed of 3000 rpm. The motor uses a multi-turn absolute encoder for feedback and has an IP65 protection class.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The MS2N07-C0BNN-ASUK0-NNNNN-NN is an adaptive synchronous servo motor developed and constructed by Bosch Rexroth Group for streamlined servo systems. Known for its high-power density and compact form factor, this synchronous machine boasts a singleturn Hiperface encoder that operates at 16 signal periods. In the context of servo motors and systems, the encoder is an essential technology that allows a controller to dynamically adjust either the shaft’s position or speed during operation. Fundamentally, the encoder converts the mechanical signals from the shaft into electrical signals, allowing a separate servo drive to process and monitor important shaft parameters. To operate properly, the motor itself must be connected to a servo drive via its power cables and encoder.
Equipped with a standard mechanical bearing, the MS2N07-C0BNN-ASUK0-NNNNN-NN achieves a nominal shaft velocity of 3000 rpm. For high-speed systems requiring higher rotational speeds, the servo drive for this motor can safely be adjusted to increase the shaft output speed up to a maximum rate of 6000 rpm. Without a built-in holding brake, this AC machine weighs only about 12 kilograms and supports flange mounting at different orientations. Considering its motor frame, the mounting hole for this machine has a diameter of 11 millimeters. The bolt circle, on the other hand, measures around 165 millimeters. The flange itself has a measurement of 140 millimeters.
At standstill conditions, the MS2N07-C0BNN-ASUK0-NNNNN-NN can safely deliver a 60 K torque of 12.8 Nm. At this operating condition, the synchronous machine draws a rated current of 6.9 A. Owing to its shaft class and winding type, this AC motor can safely operate at a peak torque of 38.8 Nm. Wake Industrial provides a one-year machine warranty for this MS2N motor.
Frequently Asked Questions about MS2N07-C0BNN-ASUK0-NNNNN-NN:
Q: What is the rotor moment of inertia of the MS2N07-C0BNN-ASUK0-NNNNN-NN?
A: The MS2N07-C0BNN-ASUK0-NNNNN-NN has a rotor moment of inertia of 0.0012 kg(m^2).
Q: What is the maximum current that the MS2N07-C0BNN-ASUK0-NNNNN-NN can safely accommodate?
A: The MS2N07-C0BNN-ASUK0-NNNNN-NN can safely accommodate a maximum current of 24.8 A.
Q: What is the 100 K standstill torque of the MS2N07-C0BNN-ASUK0-NNNNN-NN?
A: The MS2N07-C0BNN-ASUK0-NNNNN-NN has a 100 K standstill torque of 16 Nm.
Q: What is the 100 K standstill current of the MS2N07-C0BNN-ASUK0-NNNNN-NN?
A: The MS2N07-C0BNN-ASUK0-NNNNN-NN has a 100 K standstill current of 8.8 A.
Q: What type of shaft does the MS2N07-C0BNN-ASUK0-NNNNN-NN employ?
A: The MS2N07-C0BNN-ASUK0-NNNNN-NN employs an output shaft with a keyway and shaft seal.
