MS2N07-C0BNN-AMUG1-NNNNN-NN
Wake Industrial LLC is not an authorized distributor of this product.
MPN: R914501638
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
The MS2N07-C0BNN-AMUG1-NNNNN-NN is a synchronous servo motor produced by Bosch Rexroth Indramat. Part of the MS2N Synchronous Servo Motors series, it has a rated torque of 2.3 Nm and operates at a rated speed of 3000 rpm. The motor is protected with an IP65 rating and uses natural convection cooling.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The Bosch Rexroth Indramat company built the MS2N07-C0BNN-AMUG1-NNNNN-NN Servo Motor to perform industrial automation tasks in facilities. It features a stall torque of 12.8 Nm when measured at 60K. The corresponding standstill current at 60K is precisely 10.1 A. The rotor moment of inertia is defined at 0.00146 kgm².
The MS2N07-C0BNN-AMUG1-NNNNN-NN servo motor delivers a nominal torque of 9.0 Nm at a motor temperature of 100K. Its rated current under the same condition is stabilized at 7.5 A. The motor offers a rated power output of 3.84 kW. The rated speed is specified at 4070 rpm for continuous operation. It has a voltage constant value of 83.1 V/1000 min⁻¹. The servo motor is designed with 5 pole pairs for precise rotation control. The MS2N07-C0BNN-AMUG1-NNNNN-NN servo motor is capable of delivering a peak torque of 38.8 Nm when starting from a cold temperature of 20°C. This peak torque decreases slightly to 35.7 Nm at a higher thermal state of 100K. Its torque constant at 20°C is rated at 1.37 Nm per ampere. It supports a continuous RMS current of up to 36.4A and can operate at a top speed of 6000 rpm as both electrically and mechanically. The minimum winding inductance is specified as 10.5 mH.
The MS2N07-C0BNN-AMUG1-NNNNN-NN servo motor has a total mass of 14.0 kg. The power rating and speed ensure consistent torque delivery. The motor features a 0.776 Ω winding resistance at 20°C. The leakage capacitance of the motor is 2.2 nF. Its thermal characteristics support prolonged industrial applications. The thermal time constant of the winding is 46.4 seconds. The thermal time constant for the motor body itself is calculated at 14.8 minutes. This configuration enables the motor to maintain thermal stability.
Frequently Asked Questions about MS2N07-C0BNN-AMUG1-NNNNN-NN:
Q: How does MS2N07-C0BNN-AMUG1-NNNNN-NN servo motor manage thermal saturation?
A: The MS2N07-C0BNN-AMUG1-NNNNN-NN servo motor maintains thermal stability using a 46.4-second winding constant and 14.8-minute housing constant under continuous operation.
Q: What current levels drive MS2N07-C0BNN-AMUG1-NNNNN-NN servo motor to rated torque?
A: The MS2N07-C0BNN-AMUG1-NNNNN-NN servo motor reaches 9.0 Nm nominal torque at 100K with a continuous operating current of 7.5 A for steady industrial use.
Q: How is torque sensitivity defined for MS2N07-C0BNN-AMUG1-NNNNN-NN servo motor?
A: The MS2N07-C0BNN-AMUG1-NNNNN-NN servo motor features a torque constant of 1.37 Nm/A at 20°C, providing accurate proportional response to current input changes.
Q: Which load profiles match MS2N07-C0BNN-AMUG1-NNNNN-NN servo motor inertia?
A: The MS2N07-C0BNN-AMUG1-NNNNN-NN servo motor’s 0.00146 kg·m² rotor inertia suits precision systems with moderate dynamics, such as packaging actuators and indexing units.
Q: What voltage is required for MS2N07-C0BNN-AMUG1-NNNNN-NN servo motor velocity control?
A: The MS2N07-C0BNN-AMUG1-NNNNN-NN servo motor’s velocity constant is 83.1 V per 1000 min⁻¹, allowing fine speed modulation under varying drive voltage conditions.
