MS2N06-E0BRN-CMSL2-NNNNN-NN
Wake Industrial LLC is not an authorized distributor of this product.
MPN: R911393731
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
The MS2N06-E0BRN-CMSL2-NNNNN-NN synchronous servo motor has a rated torque of 4.8 Nm, a maximum torque of 22 Nm, and a rated speed of 3000 rpm. Part of the MS2N Synchronous Servo Motors by Bosch Rexroth Indramat, it incorporates an IP65 protection class and features a rotatable connector for flexible installation.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
Bosch Rexroth manufactures the MS2N06-E0BRN-CMSL2-NNNNN-NN servo motor that is used for industrial automation applications that require precise drive capabilities. The motor can meet the safety and performance standards that are essential for advanced systems.
The MS2N06-E0BRN-CMSL2-NNNNN-NN servo motor is capable of operating at a maximum speed of 6000 rpm and has a 24 mm shaft width. The shaft is 50 mm long and has a keyway in it. When cooled from the inside, the motor makes 13.0 Nm of power when it is stationary at 60k and 16.3 Nm when it is at 100k. 53.4 Nm is the most power. The unit can cool itself and weighs 14.2 kg altogether. The encoder used is a multiturn absolute type that can handle 4096 turns and has a 20-bit digital precision. Because it is safe, the ACURO@link interface that comes with the encoder is SIL2 and PLd. The shaft has a mounting hole for M8 screws, and the flange is 116 mm wide and has a 95 mm spigot and 130 mm bolt circle. If there is no stop, the rotor has no inertia. When the brake is applied, it has 0.00103 kg/m² of inertia. The servo motor has a size 2 holding brake that helps it stay in place when it is not working.
The electrical link is made with a single cable, and an M23 connector that can be rotated is used to make installation easier. The MS2N06-E0BRN-CMSL2-NNNNN-NN servo motor is protected by an IP64 code, which means that solids and liquids cannot get into it. The motor can be used with system setups that need accurate synchronization and continuous motion control. The motor is designed to meet technical requirements that make sure it works the same way in all robotic systems.
Frequently Asked Questions about MS2N06-E0BRN-CMSL2-NNNNN-NN:
Q: Why does MS2N06-E0BRN-CMSL2-NNNNN-NN have 0 rotor inertia?
A: Without brake, the rotor inertia is zero to enable rapid response. It improves performance for fast acceleration and deceleration cycles.
Q: How does MS2N06-E0BRN-CMSL2-NNNNN-NN ensure mounting precision?
A: The 116 mm flange and 130 mm bolt circle ensure accurate mounting. These dimensions support alignment and secure fitting in machine assemblies.
Q: Why does MS2N06-E0BRN-CMSL2-NNNNN-NN include a 24 mm shaft?
A: A 24 mm shaft supports medium load ranges with optimal balance. It enables stable mechanical transmission in aligned drive setups.
Q: Do the 4096 revolutions in MS2N06-E0BRN-CMSL2-NNNNN-NN help feedback?
A: Yes, 4096 revolutions provide absolute multiturn feedback. This maintains accurate position tracking even after power loss or system reset.
Q: How does MS2N06-E0BRN-CMSL2-NNNNN-NN ensure safe stopping?
A: The integrated size 2 holding brake ensures secure shaft retention. It prevents motion drift during downtime and improves load stability.
