MS2N06-E0BRN-CMSK0-NNNNN-NN
Wake Industrial LLC is not an authorized distributor of this product.
MPN: R911387728
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
The Bosch Rexroth Indramat MS2N06-E0BRN-CMSK0-NNNNN-NN, part of the MS2N Synchronous Servo Motors series, features a compact 60mm flange size. This motor delivers a rated torque of 2.3 Nm, peak torque of 6.0 Nm, and runs at a rated speed of 3000 rpm. It has a protection class IP65 and utilizes natural convection for cooling.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The MS2N06-E0BRN-CMSK0-NNNNN-NN is a small-sized synchronous servo motor from the Bosch Rexroth Indramat MS2N range.
It is designed for use in low-power, yet sensitive applications where control and response are paramount. This motor generates a rated power of 0.57 kW and a steady torque of 2.3 Nm. It has a baseline speed of 3000 rpm. It operates on a 230-volt supply, and total current consumption is 2.2 amps, which makes it small and efficient when considering applications that need constant torque and require a relatively small amount of power and current. It is designed with headroom to deal with peak torque of up to 6.0 Nm, providing good coverage of dynamic motion sequence requirements, which need occasional sequences of larger forces. There are no fans or blowers used in cooling; as a result, it fits clean, quiet, and low-maintenance conditions well. Stator thermal time constant is estimated as 1044 seconds (about 17.4 minutes), which means that the motor can reach 63 percent of its static temperature in the case of continuing pressure. Any stability imposed by that slow thermal rise can be used during long cycles of operation.
Feedback is provided via a SICK/Stegmann single-turn Hiperface DSL encoder, which is a digital communication interface that carries data and power on a single cable. That decreases the complexity of wiring and avoids sacrificing position control resolution. Its torque constant is 1.93 Nm/A, and the voltage constant is 117.3 V per 1000 rpm (measured at 20 °C), which certifies its motor performance predictability and repeatability across a wide outdoor or indoor operating range. The motor is waterproof and dust-tight due to its IP65 protection, which is useful in severe manufacturing environments. Its 60 mm flange size allows it to be employed in even the tightest mechanical applications, and its swivel plug connector makes installation simple.
Frequently Asked Questions about MS2N06-E0BRN-CMSK0-NNNNN-NN:
Q: What type of encoder is used in the MS2N06-E0BRN-CMSK0-NNNNN-NN?
A: The MS2N06-E0BRN-CMSK0-NNNNN-NN features a single-turn Hiperface DSL encoder by SICK/Stegmann, which combines power and signal over one cable for simplified installation.
Q: How is the MS2N06-E0BRN-CMSK0-NNNNN-NN motor cooled?
A: It is naturally cooled without fans or blowers, making it suitable for low-noise, low-maintenance environments and compact systems.
Q: What are the power and torque specs of the MS2N06-E0BRN-CMSK0-NNNNN-NN?
A: This motor delivers 0.57 kW power and 2.3 Nm continuous torque at 3000 RPM, with a peak torque capability of 6.0 Nm for handling dynamic loads.
Q: What type of environment can the MS2N06-E0BRN-CMSK0-NNNNN-NN handle?
A: With IP65 protection, the MS2N06-E0BRN-CMSK0-NNNNN-NN is completely dustproof and resistant to water spray, making it reliable in industrial settings.
Q: What makes installation easy for the MS2N06-E0BRN-CMSK0-NNNNN-NN?
A: The motor has a swivel plug connector and a 60 mm flange, which simplifies mounting even in tight mechanical spaces.
