MS2N06-E0BRN-BMUH2-NNNNE-NN
Wake Industrial LLC is not an authorized distributor of this product.
MPN: R911384944
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
-
Available
The MS2N06-E0BRN-BMUH2-NNNNE-NN, manufactured by Bosch Rexroth Indramat, is part of the MS2N Synchronous Servo Motors Series, featuring a 70 mm flange size. It delivers a rated power of 0.95 kW and a peak torque of 7.2 Nm. This servo motor supports a maximum speed of 6000 rpm and comes with an IP65 protection class.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
MS2N06-E0BRN-BMUH2-NNNNE-NN is a self-cooled servo motor. It is part of Bosch Rexroth’s MS2N product line. Salient features of MS2N motors include multiple cooling options, multiple shaft sealing options, singleturn and multiturn encoders in basic/standard/advanced performance versions, single or dual cable connections, and optional holding brakes. MS2N06-E0BRN-BMUH2-NNNNE-NN is a motor with a smooth shaft that does not include a sealing ring. Protection rating of MS2N motors depends on the shaft seal configuration: motors with shafts that are without a seal are IP64 rated. Adding a seal gives motors IP65 level protection. Using sealing air gives motors IP67 level protection. Unlike most other motors, there is an additional grounding connection on this motor. Connecting a ground wire to this connection point offers a higher level of safety from electrostatic discharge.
This low-inertia motor has windings rated for 4500 RPM. Nominal speed rating of the AC motor is 3120 RPM. The peak electrical/mechanical speed is 6000 RPM. A multiturn encoder supplies digital feedback. This encoder uses the Hiperface protocol for reliable and fast transmission of motor feedback. An M23 connector is mounted on the motor housing. This rotatable connector connects to a hybrid cable used for carrying all power and feedback signals. With a single cable, is it easier and less time-consuming to perform motor installation. Operators need to maintain fewer spares. In case of a cable fault, it takes less time to identify and replace the one faulty cable. The shaft on the MS2N06-E0BRN-BMUH2-NNNNE-NN motor is held at standstill by a size 2 holding brake. This 15 Nm rated brake is designed to only release the shaft after the motor controller transmits a 24 Volts DC release signal.
Frequently Asked Questions about MS2N06-E0BRN-BMUH2-NNNNE-NN:
Q: Is a holding brake installed on the motor?
A: A holding brake is installed on the motor.
Q: What is holding torque for the brake?
A: Holding torque for the brake is 15 Nm.
Q: What is the optimal ambient tempera rue?
A: The optimal ambient temperature is 0 to 40 degrees Celsius.
Q: What is the motor flange size?
A: Flange size of the motor is 116 millimeters.
Q: How can you identify the motor?
A: A type plate on the housing lists relevant product information.
