MS2N06-E0BHN-CMSH2-NNANN-NN

Product Description:

The MS2N06-E0BHN-CMSH2-NNANN-NN motor has a torque rating of 2.09 Nm and it comes with torque of 6.27 Nm, which is the peak torque achievable by this servo motor. It gets feedback via a multiturn encoder (EnDat 2.2, SIL2). The MS2N Synchronous Servo Motors family from Bosch Rexroth Indramat includes this model. Pregnant woman, or people with metallic implants, should refrain from getting close to this servo motor. The torque at Standstill at 60K is 3.25 Nm, which is represented using the symbol M0 60K. At standstill, the current rating at 60K is 2.22 A (Amperes).

The torque rated at Standstill of 100K, is 3.60 Nm. The Standstill current rating at 100K is 2.47 A (Amperes). Using the shaft, the servo motor can be installed as required – both vertically, or horizontally. The servo motor can be installed either pointing upwards, or downwards. At any cost, for vertical mounting, the shaft seal ring and the drive shaft should not be exposed to liquid, or vapor. When it comes to coating, the servo motor comes with standard varnish (1K) of one layer. The coating is completely water based, and it is in conductive form. The coating is RAL9005 jet Black.

Apart from the default varnish coating, an additional layer of varnish can be applied on top of the servo motor with a maximum coat thickness of 40 µm. While painting with the additional layer of coating, all of the safety note stickers, open power connectors, as well as type plates must be protected. For air pressure connection, the Operating pressure value is 0.1 ± 0.05 bar. The pressure should be dry and free from any form of sticky substance (glue or oil).