MS2N06-E0BHN-CMSH0-NNNNN-NN

Product Description:

The Bosch Rexroth Indramat MS2N06-E0BHN-CMSH0-NNNNN-NN is a 600 W (Six Hundred Watts) servo motor (synchronous) from the MS2N family. The rated voltage for this servo is 230 V (Two hundred and thirty volts). When it comes to its max torque, it is rated at 5.73 Nm. The MS2N06-E0BHN-CMSH0-NNNNN-NN has a absolute encoder, which is multiturn by nature. This servo cools itself naturally. The Axial forces, which is denoted using the symbol FA, are allowed without restriction up to the mark 40 N.

There is also scope of achieving higher axial forces. However, to do so, the servo motor will need to undergo precise and detailed positioning. When it comes to the Maximum disconnection time, it is rated at 80 milliseconds (ms). On the other hand, the Maximum connection time is rated at 30 milliseconds (ms). The rated current for this servo drive is rated at 0.73 amperes. The rated voltage for this servo is rated at 24 Volts (Twenty four Volts). The Holding torque is valued at 10.00 Nm, which is described using the symbol M4. The EN 60034-1 has been used to verify the motor for performance behavior. The 2014/35/EU low voltage directive applies to this servo motor.

The MS2N06-E0BHN-CMSH0-NNNNN-NN has been designed to be used in industrial machinery. The electrical installation needs to comply with the protective criteria established by the EMC Directive 2014/30/EU. Any form of inappropriate use, be it usage in industries where this motor is not suited, is strictly prohibited. Before starting up this servo motor, it must be ensured that it is secure against reactivation. Furthermore, the de-energization feature on the servo motor must be enabled.