MS2N06-E0BHN-BSUK2-NNNNN-NN
Wake Industrial LLC is not an authorized distributor of this product.
MPN: R911385406
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
The MS2N06-E0BHN-BSUK2-NNNNN-NN is a high-performance synchronous servo motor with a rated torque of 18 Nm and a cooling type of natural convection. Manufactured by Bosch Rexroth Indramat as part of the MS2N Synchronous Servo Motors series, it features a 140 mm flange and IP65 protection. The motor operates at a rated speed of 3000 rpm.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The Indramat’ induction motor MS2N06-E0BHN-BSUK2-NNNNN-NN is presented with a built-in single revolution absolute encoder for accurate feedback of speed and position. It supports HIPERFACE interface and 128 signal periods along with a system accuracy of 120”. This motor comes in a standard length of 264 mm and its balanced keyway shaft measures 24 mm W x 50 mm L.
The MS2N06-E0BHN-BSUK2-NNNNN-NN AC motor features a dual cable electrical connection through its circular M23 and M17 connector. Its rotor is light weight and possesses a low inertia of 0.00103 kg·m² to tackle rapid speeds with immense control. The motor spins at a normal continuous speed of 2000 rev/minute and consumes a rated power of 2750 W from a 400 VAC source, while its peak electrical speed can go up to 4000 rev/minute with a maximum current utilization of 25.40 A in overload conditions. Its standstill torque is 13.0 Nm at 60K and delivers a maximum torque of 53.4 Nm at the temperature of 68 °F. In warm conditions it has the capacity to produce 49.0 Nm of peak torque and its constant of voltage is 157 V/1000 spins. The MS2N motor has a resistance is 2.54 Ohms at 68 °F and 27.6 mH of minimum inductance.
The MS2N06-E0BHN-BSUK2-NNNNN-NN motor is accompanied by a size 2, electrically released holding brake, that possess a holding torque of 15 Nm, 0.00014 kg·m² of inertia and operates on a voltage source of 24 V. The brake takes maximum 50 ms of time to engage and 135 ms to disengage while offers maximum switching energy of 888 joules. The MS2N motor operates as a self-cooling unit and its total combined with the brake is 13 kg.
Frequently Asked Questions about MS2N06-E0BHN-BSUK2-NNNNN-NN:
Q: How does the HIPERFACE encoder benefit the MS2N06-E0BHN-BSUK2-NNNNN-NN motor?
A: The HIPERFACE encoder enables high-resolution feedback, allowing precise position and speed control in dynamic automation tasks. This improves synchronization in multi-axis motion systems.
Q: How does the motor's low inertia affect its performance?
A: The 0.00103 kg·m² inertia helps the motor accelerate and decelerate rapidly. This is critical in high-speed cycles like pick-and-place tasks.
Q: What purpose does the holding brake serve in the MS2N06-E0BHN-BSUK2-NNNNN-NN?
A: The electrically released brake locks the motor shaft when powered down. This is essential for vertical applications where load holding is needed.
Q: How does the 157 V/1000 RPM voltage constant impact motor control?
A: It determines the voltage required per unit of speed, which helps in fine-tuning servo drives. This ensures stability in closed-loop operations.
Q: How fast does the brake in MS2N06-E0BHN-BSUK2-NNNNN-NN engage/disengage and why is that important?
A: With 50 ms engagement and 135 ms disengagement, it ensures minimal delay in stopping/starting. This is vital in emergency stop or indexing operations.
