MS2N06-E0BHN-BMUL0-NNNNN-NN
Wake Industrial LLC is not an authorized distributor of this product.
MPN: R911393554
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
The MS2N06-E0BHN-BMUL0-NNNNN-NN, part of Bosch Rexroth Indramat's MS2N Synchronous Servo Motors series, features a permanent magnet, synchronous design. It has a rated torque of 3.2 Nm, a peak torque of 9.0 Nm, and a rated speed of 3000 rpm. The motor's protection class is IP65 and uses a self-cooling system.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
Bosch Indramat MS2N06-E0BHN-BMUL0-NNNNN-NN Servo motor is designed for precision-driven industrial automation tasks. It comes with a flange-mount configuration (IM B5). This makes installation simple in systems that require a face-mounted setup. The motor uses a keyed shaft with half-key balancing for smooth rotation and mechanical stability.
The MS2N06-E0BHN-BMUL0-NNNNN-NN servo motor is built without a shaft seal. Standard deep-groove ball bearings help maintain reliable motion and minimize wear over time. The resistance to angular acceleration of the rotor is 0.00103 kg·m². The motor itself weighs 11.5 kg without the brake. Thermally, this motor is built to handle extended operations. The winding system takes about 48.6 seconds to reach thermal balance. The outer housing stabilizes in about 20 minutes. The MS2N06-E0BHN-BMUL0-NNNNN-NN servo motor supports a top mechanical speed of 6000 rpm. Inside, the motor includes five magnetic pole pairs to ensure accurate movement control. Its electrical characteristics include a leakage capacitance of 3.03 nF. The motor uses Class F insulation and supports coil temperatures up to 155°C. It offers dependable thermal protection under continuous use. The motor has an electrical speed limit of 4000 rpm. The phase inductance of the motor is 27.6 mH. The peak torque at cold start reaches 53.4 Nm. It produces 49.0 Nm of torque at full load (100K).
The MS2N06-E0BHN-BMUL0-NNNNN-NN servo motor delivers a continuous torque of 13.15 Nm and a continuous current of 5.65 A at 100K. The torque coefficient of the motor is 2.58 Nm per ampere, and the back EMF is 157 volts per 1000 rpm. This MS2N06 servo motor has a phase resistance of 2.54 ohms (measured at 20°C). It has a base operating speed of 2000 rpm. The nominal power of the motor is 2.75 kW. It provides 16.3 Nm torque and requires 6.8 A current for holding applications.
Frequently Asked Questions about MS2N06-E0BHN-BMUL0-NNNNN-NN:
Q: Why does the MS2N06-E0BHN-BMUL0-NNNNN-NN use a flange-mount configuration?
A: The flange-mount configuration (IM B5) simplifies installation in systems requiring a face-mounted setup. This ensures reliable integration with minimal assembly complexity in industrial automation systems.
Q: How does the keyed shaft improve the MS2N06-E0BHN-BMUL0-NNNNN-NN motor’s performance?
A: The keyed shaft with half-key balancing ensures smooth rotation and improves mechanical stability. This reduces vibrations and wear over time, enhancing motor longevity and performance.
Q: Why does the MS2N06-E0BHN-BMUL0-NNNNN-NN lack a shaft seal?
A: The motor design without a shaft seal minimizes mechanical complexity and reduces the risk of seal-related failures. It is optimized for environments where seal protection isn’t critical.
Q: How does the Class F insulation benefit the MS2N06-E0BHN-BMUL0-NNNNN-NN?
A: The Class F insulation ensures that the motor can withstand coil temperatures up to 155°C. This provides greater durability and reliability in continuous-duty, high-temperature environments.
Q: Why does the MS2N06-E0BHN-BMUL0-NNNNN-NN motor have a peak torque of 53.4 Nm at cold start?
A: The peak torque of 53.4 Nm during cold start enables the motor to handle high-load conditions efficiently. This feature ensures superior performance during initial startup in cold environments.
