MS2N06-E0BHN-BMUK2-NNNNN-NN
Wake Industrial LLC is not an authorized distributor of this product.
MPN: R911389613
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
The MS2N06-E0BHN-BMUK2-NNNNN-NN is a synchronous servo motor manufactured by Bosch Rexroth Indramat. Part of the MS2N Synchronous Servo Motors series, it features natural convection cooling and supports rotatable connectors. It has a continuous stall torque of 1.6 Nm and an IP65 protection rating.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The MS2N06-E0BHN-BMUK2-NNNNN-NN is a servo motor from Bosch Rexroth. It is designed to produce steady torque and speed response, used in industrial automation. It generates a steady torque of 13.15 Nm at 100K. The motor provides a steady state power level of 2.75 kW. The holding torque is 13.0 Nm at 60K. It is consuming 5.4 A at this point.
The stall torque of MS2N06-E0BHN-BMUK2-NNNNN-NN servo motor is 16.3 Nm with the shaft locked at 100K. This motor needs a stall current of 6.8 A. Under these conditions, the steady-state current is 5.65 A to allow stable operation. The base speed of the motor is 2000 rpm. It has a maximum electrical speed of 4000 rpm and a maximum mechanical speed of 6000 rpm. It produces a maximum of 53.4 Nm in cold startup (20°C). It has a 100K thermal torque limit of 49.0 Nm. The motor has a capacity of drawing 25.4 A RMS at peak loads. The voltage constant of the MS2N06-E0BHN-BMUK2-NNNNN-NN servo motor at the same temperature is 157 volts per 1000rpm. The motor phase resistance is 2.54 ohms. Its inductance is 27.6 mH. The stray capacitance is given as 3.03 nF. The response of the winding in terms of heating is 48.6 seconds. It takes 20.0 minutes until the housing attains complete heat stabilization. The rotor inertia is provided as 0.00103 kgm2.
The MS2N06-E0BHN-BMUK2-NNNNN-NN servo motor employs a single cable interface with rotatable connector M23. It also has an integrated Hiperface multiturn encoder with SIL2 safety certification. The encoder offers absolute positioning in 4096 turns. It is a motor with standard deep groove ball bearings and IP65 when a seal ring is fitted. The motor is 13.0 kilograms and has five pole pairs to achieve a smooth motion control.
Frequently Asked Questions about MS2N06-E0BHN-BMUK2-NNNNN-NN:
Q: Why does the MS2N06-E0BHN-BMUK2-NNNNN-NN use 5 pole pairs?
A: The MS2N06-E0BHN-BMUK2-NNNNN-NN servo motor uses 5 pole pairs to improve torque smoothness and reduce cogging. This enables highly precise and vibration-free motion in dynamic automation systems.
Q: How does Hiperface encoder benefit MS2N06-E0BHN-BMUK2-NNNNN-NN?
A: The MS2N06-E0BHN-BMUK2-NNNNN-NN features a Hiperface encoder for precise position feedback and fast synchronization. This improves control accuracy in multi-axis motion systems.
Q: Why does the MS2N06-E0BHN-BMUK2-NNNNN-NN use M23 connector?
A: The M23 rotatable connector on MS2N06-E0BHN-BMUK2-NNNNN-NN simplifies cable routing in space-constrained installations. It ensures reliable signal and power transmission under industrial conditions.
Q: What makes MS2N06-E0BHN-BMUK2-NNNNN-NN suitable for SIL2 use?
A: The MS2N06-E0BHN-BMUK2-NNNNN-NN is SIL2 certified, making it compliant with safety-critical automation applications. This helps in building functional safety systems without external feedback components.
Q: Why is rotor inertia tightly specified in MS2N06-E0BHN-BMUK2-NNNNN-NN?
A: The MS2N06-E0BHN-BMUK2-NNNNN-NN has a defined rotor inertia to match common load dynamics precisely. It ensures predictable acceleration and deceleration in coordinated motion profiles.
