MS2N06-E0BHN-ASUH2-NNNNN-NN
Wake Industrial LLC is not an authorized distributor of this product.
MPN: R914501695
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
The MS2N06-E0BHN-ASUH2-NNNNN-NN synchronous servo motor has a motor size of 06, offers a rated power of 1.32 kW, a peak torque of 5.5 Nm, and is naturally cooled with an approximate weight of 3.5 kilograms. Part of the MS2N Synchronous Servo Motors series by Bosch Rexroth Indramat, it features IP65 protection.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
Bosch Rexroth Indramat produces the MS2N06-E0BHN-ASUH2-NNNNN-NN Synchronous servo motor. Its design prioritizes controlled acceleration, precision, and consistent torque production for demanding dynamic activities. The MS2N series, of which this servo motor is a member, is utilized extensively in the many automated industrial processes that are currently in use.
At 60K, the MS2N06-E0BHN-ASUH2-NNNNN-NN synchronous servo motor produces 5.4 A of current and 13.0 Nm of stationary torque. The stationary torque rises to 16.3 Nm at 100K with a 6.8 A current. The motor has a rated current of 5.65 A, a rated torque of 13.15 Nm, and a rated speed of 2000 rpm at 100K. Reaching 2.75 kW is the rated power. A mechanical speed of 6000 rpm and an electrical speed of 4000 rpm are both supported by the product. At 20°C and 100K, the maximum torque is 53.4 Nm and 49.0 Nm, respectively. It is possible to determine the rotor moment of inertia to be 0.00103 kg·m². It is feasible to withstand an RMS current of up to 25.4 A. A voltage constant of 157 V per 1000 rpm and a torque constant of 2.58 Nm/A were measured at 20°C. At 20 degrees Celsius, the winding has a resistance of 2.54 Ohms and an inductance of 27.6 mH at its lowest point. With a leakage capacitance of 3.03 nF, this motor is fitted with five pole pairs.
The MS2N06-E0BHN-ASUH2-NNNNN-NN servo motor has thermal time constants for the motor and windings of 20 minutes and 48.6 seconds. These specs characterize the operation's steady-state thermal behavior and heat dissipation. In continuous-duty applications, these factors are closely related to thermal management measures. When precise torque and temperature control are required, the servo motor is widely used in motion control systems.
Frequently Asked Questions about MS2N06-E0BHN-ASUH2-NNNNN-NN:
Q: Why does MS2N06-E0BHN-ASUH2-NNNNN-NN have a voltage constant of 157 V per 1000 rpm?
A: This voltage constant allows the servo drive to accurately determine speed feedback and ensure stable voltage-speed correlation during high-speed operation.
Q: How does MS2N06-E0BHN-ASUH2-NNNNN-NN benefit from a 25.4 A maximum RMS current?
A: The high RMS current supports higher dynamic loads and enables the motor to sustain torque in peak duty cycles without performance loss.
Q: Does MS2N06-E0BHN-ASUH2-NNNNN-NN support 4000 rpm maximum electrical speed for rapid axis movements?
A: Yes, it ensures faster servo positioning and reduced cycle times in precision applications requiring fast acceleration and deceleration.
Q: Why does MS2N06-E0BHN-ASUH2-NNNNN-NN have a rotor moment of inertia of up to 0.00103 kg·m²?
A: This inertia supports optimal balance between acceleration capability and load stability during sudden directional changes.
Q: How do the 5 pole pairs in MS2N06-E0BHN-ASUH2-NNNNN-NN impact motor synchronization?
A: They determine the electrical frequency and improve torque ripple characteristics in synchronization with the drive controller.
