MS2N06-D1BNN-CMUG0-NNNNN-NN
Wake Industrial LLC is not an authorized distributor of this product.
MPN: R911384308
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
The MS2N06-D1BNN-CMUG0-NNNNN-NN synchronous servo motor features a rated power of 1.0 kW, a rated speed of 3000 rpm, a peak torque of 9.6 Nm, and natural convection cooling. Part of the MS2N Synchronous Servo Motors series by Bosch Rexroth Indramat, it comes with IP65 protection and utilizes a multiturn absolute EnDAT 2.2 encoder.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The MS2N06-D1BNN-CMUG0-NNNNN-NN is a flexible low inertial synchronous motor manufactured by Bosch Rexroth Indramat in accordance to international standards for quality and product safety. The motor has a coated metallic housing designed to provide internal sensitive components with protection according to IP65, it is also able to function at high performance levels in environments with contaminants like dust, and water splash directed at it from an angle. Although this motor has been designed as a standard, internationally approved unit, it still requires proper transportation, storage, and operational conditions for it to function as described in its documentation. Environments where this motor is to be operated should have an ambient temperature of between 0 and 40 degrees, also relative humidity levels should not exceed 95 per cent, and vibrations should be kept at a minimum. Also, the operation of this motor outside should be avoided, and a direct operation on three-phase networks is forbidden.
The MS2N06-D1BNN-CMUG0-NNNNN-NN maintains its housing quality for more than five years, it is protected from corrosive deterioration by dilute acids, dilute alkali, and mineral oil by a RAL 9005 black varnish. The oscillating quality level for this unit is level A, while the permissible installation altitude is between 0 to 1000 meters above sea level. A temperature sensor is mounted on the winding of this motor unit to keep track of the heat on the winding during the operation of the motor. As a standard, a warning is issued at a winding temperature of 140 degrees, the product is also automatically shut down when the winding temperature exceeds 145 degrees.
The MS2N06-D1BNN-CMUG0-NNNNN-NN motor does not come with a holding brake. During operation, the rotor of this industrial motor can reach a peak speed of 6000 revolutions per minute.
Frequently Asked Questions about MS2N06-D1BNN-CMUG0-NNNNN-NN:
Q: How does the MS2N06-D1BNN-CMUG0-NNNNN-NN protect itself from overheating?
A: There is sensor attached to the winding in this motor. The sensor helps the connected controller to detect any risk of overheating and disconnect the motor quickly.
Q: What type of electrical connector does the MS2N06-D1BNN-CMUG0-NNNNN-NN use?
A: There is a rotatable connector single cable connector integrated into this motor.
Q: Is there a keyway attached to the shaft of this industrial motor?
A: No. The MS2N06-D1BNN-CMUG0-NNNNN-NN is equipped with a smooth output shaft that also features shaft sealing ring.
Q: What is the cooling mechanism of this motor?
A: The MS2N06-D1BNN-CMUG0-NNNNN-NN is a self cooled device. Heat is dissipated through its housing surface by natural convection and thermal radiation.
Q: Is the MS2N06-D1BNN-CMUG0-NNNNN-NN a water proof device?
A: No. The housing of this motor only provides protection against dust and water splashes.
