MS2N06-D0BRN-DMSG2-NNNNN-NN

Product Description:

The MS2N06-D0BRN-DMSG2-NNNNN-NN Bosch Rexroth Indramat synchronous servomotor can be operated with derating at up to 60 °C. This motor’s mounting flange is designed according to DIN 42948 specifications. The product’s shaft has a length of 50 mm and a diameter of 24 mm. This device relies on a multi-turn encoder for feedback. The unit’s connector can be turned up to a maximum of 10 times and has an adjustment torque of 4 Nm to 10 Nm. It can be coated with an extra varnish layer of a maximum thickness of 40 µm. This motor’s connection must be done with the manufacturer’s readymade connection cable.

The product produces a high electrical voltage when it is operated. This device’s hot surface should not make contact with temperature-sensitive components. The unit’s commissioning is possible only as part of a drive system. It must be ascertained that the motor is not damaged and the holding brake functions properly before the commissioning is done. This motor has to be checked for increased vibrations and operational noise during the operation phase. The product’s functioning tends to get affected adversely because of excessive chips, dust, or dirt. This device can trigger undesirable consequences because of insufficient heat radiation. The unit is likely to make a running noise due to the entry of foreign bodies or damaged bearings. It can be easily recycled because of its high metal content.

This synchronous servomotor comes with an additional rating plate and safety notes and instructions on use. The product’s temperature-sensitive components and connection cables must be kept at a distance from each other. This device has a 155 insulation class. The unit’s protective cover on the shaft can be removed only just before its installation. Its brake has a 24 VDC +/-10% voltage rating.