MS2N06-D0BRN-CMUH2-NNNNN-NN

Product Description:

The MS2N06-D0BRN-CMUH2-NNNNN-NN from Bosch Rexroth doesn’t come with a brake, so it’s the kind of motor that’s built for free-running systems. Not ideal where holding torque matters when off, but for packaging lines or pick-and-place setups, it does fine. The cooling is natural; no fans or anything — air just flows over the body. That’s one less failure point. Rated speed is 3000 rpm and stays consistent under load in most clean-room style environments. The frame size is 06, which keeps the footprint low. That matters when panel space is already a fight.

The weight lands close to 3.2 kg, light enough to bolt on without extra bracing. The voltage class is 400V — standard range for most Bosch-compatible drives. The plug connector locks in quick and doesn’t take much fiddling. No need to open covers or mess with terminals. The shaft version is standard, nothing keyed or hollow, so it mates with basic couplings or gearboxes straight out. IP65 protection is included, which gives decent resistance against water jets and total dust seal — not submersible, but holds up on factory floors, even near washdown zones.

The torque sits at 2.1 Nm — not huge, but fine for machines not moving loads with tons of inertia. The Winding code is RN; pairs with the Bosch drive line without hiccups. The Encoder type is CMUH2 — clean pulses, solid feedback, not prone to drift. The motor runs close to 0.63 kW in power. Usually gets mounted on lighter gantries, some robotic axis, maybe labeling systems. Built to work, not impress. Doesn't throw features it doesn't need. Basic, stable, and doesn’t overcomplicate the job.