MS2N06-D0BRN-CMSG0-NNNNN-NN
Wake Industrial LLC is not an authorized distributor of this product.
MPN: R911382902
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
The MS2N06-D0BRN-CMSG0-NNNNN-NN synchronous servo motor offers a rated power of 1.7 kW, a rated torque of 6 Nm, a maximum torque of 18 Nm, and a rated speed of 3000 rpm. Designed as part of the MS2N Synchronous Servo Motors series from Bosch Rexroth Indramat, it features IP65 protection and a rotatable axial connector plug.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The MS2N06-D0BRN-CMSG0-NNNNN-NN is a servo motor developed for controlled motion in industrial automation systems. The servo motor is engineered by Bosch Rexroth. This motor operates at a nominal speed of 3800 RPM. It has a rated 6.20 Nm torque at 100 degrees C. At cold conditions, its overload torque is 34.8 Nm and 32.0 Nm at warm conditions.
The MS2N06-D0BRN-CMSG0-NNNNN-NN servo motor has a nominal power output of 2.48 kW. At the same temperature, its required current input is 5.40 A. The start-up performance has a 9.70 Nm torque at 60 degrees C and 11.9 Nm at 100 degrees C. The short-term high-load tolerance is ensured by a surge current of 32.7 A. It reaches the maximum speed of 6000 RPM in both mechanical and electrical speed limits. The motor is a five-pole legacy that balances the magnetic field. The MS2N06-D0BRN-CMSG0-NNNNN-NN servo motor has the stator resistance of 1.13 Ohms. It has an inductance of 11.06 mH, and the current is handled with stability. Its rotor inertia is a very accurate number of 0.00065 Kgm2 and the overall unit weight without any brake system weighs 9.0 Kg. The cooling of this servo motor is self-ventilated, and its type is IC410. The IP rating includes the shaft seal IP64. The optional shaft seal that is not selected here can make IP65 possible.
The MS2N06-D0BRN-CMSG0-NNNNN-NN servo motor allows installation at altitudes up to 1000 meters without performance loss. The motor is F-rated on insulation. The wind heat-up time is 38.6 seconds, and the total thermal delay is 17.4 minutes. The position feedback system features a 20-bit high-resolution encoder to offer SIL2 and PLd certification. It uses an absolute multi-turn system capable of 4096 revolutions. The communication with the control system is established through the ACUROlink digital interface.
Frequently Asked Questions about MS2N06-D0BRN-CMSG0-NNNNN-NN:
Q: How does the rotor inertia of 0.00065 Kgm^2 affect the motor's response?
A: The low rotor inertia ensures rapid acceleration and deceleration, improving dynamic response in demanding motion control environments.
Q: What is the significance of ACUROLink in the MS2N06-D0BRN-CMSG0-NNNNN-NN servo motor?
A: ACUROLink provides a high-speed, noise-resistant communication interface with controllers, improving signal integrity and synchronization.
Q: Why is a 20-bit encoder used in the MS2N06-D0BRN-CMSG0-NNNNN-NN motor?
A: The 20-bit encoder allows for precise position control, which is essential for high-resolution motion applications in automation systems.
Q: How does surge current tolerance affect the MS2N06-D0BRN-CMSG0-NNNNN-NN motor's reliability?
A: The ability to handle 32.7 A surge current allows the motor to withstand high-load starts without damage, enhancing operational safety.
Q: Why is F-class insulation used in the MS2N06-D0BRN-CMSG0-NNNNN-NN motor?
A: F-class insulation allows the motor to operate safely at higher temperatures, increasing its durability under thermally stressful conditions.
