MS2N06-D0BRN-ASUH0-NNANN-NN
Wake Industrial LLC is not an authorized distributor of this product.
MPN: R911378098
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
The MS2N06-D0BRN-ASUH0-NNANN-NN is a synchronous servo motor manufactured by Bosch Rexroth Indramat. Part of the MS2N Synchronous Servo Motors series, it has a continuous stall torque of 2.5 Nm and a rated speed of 3000 rpm. The motor features natural convection cooling and a rated voltage of 400 V.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
MS2N06-D0BRN-ASUH0-NNANN-NN is a synchronous motor with a singleturn encoder. This encoder provides basic performance for absolute feedback. Closed loop systems that use feedback are critical for applications that require accurate motor position and speed control. MS2N motors from Bosch Rexroth include integrated encoders. Operators can select encoders with basic, advanced, and high-performance encoders. These encoders are available in multiturn and singleturn variants with varying resolutions. MS2N06-D0BRN-ASUH0-NNANN-NN has two cable connections that carry power from the servo controller to the motor and feedback from the motor to the controller. The power cable connects to an M23 connector on the motor housing. This connector can be rotated freely to match installation requirements. Standard deep-groove bearings are used on the motor. High-temperature grease provides lubrication for high performance. Operating life of the bearings depends on a number of factors that include shaft load and ambient conditions.
Depending on conditions, the service life can vary from 20,000 hours to 30,000 hours. When recommended operating conditions are not met, service life of the bearings will reduce. MS2N06-D0BRN-ASUH0-NNANN-NN is a self-cooled motor. It dissipates heat via convection and conduction. Pollution on the motor surface will reduce heat dissipation. Therefore, regular cleaning is required to ensure a pollution-free motor surface. Protection category of the motor is IP64. This is due to the absence of a seal on the smooth shaft. Speed rating of the motor at 100K overtemperature is 3800 RPM, the rated torque is 6.2 Nm and the rated power is 2.48 kilowatts. The maximum torque at 20 degrees Celsius is 34.8 Nm and falls to 32.7 Nm when the motor gets warm. Approximate weight of the motor is 9 kilograms.
Frequently Asked Questions about MS2N06-D0BRN-ASUH0-NNANN-NN:
Q: Does the shaft include a seal?
A: A seal is not installed on the motor shaft.
Q: What is the motor protection rating?
A: The motor protection rating is IP64.
Q: What is the motor mass?
A: Weight of the motor is 9 kilograms.
Q: Which type of encoder is installed on the motor?
A: A basic performance encoder is installed on the motor.
Q: Which varnish is used on the motor?
A: A standard black varnish is used on the motor.
