MS2N06-D0BRN-ASUG0-NNNNP-NN

Product Description:

MS2N06-D0BRN-ASUG0-NNNNP-NN is a high-speed Bosch Rexroth servo motor. It can operate continuously at 3800 RPM and reach peak speeds of 6000 RPM. Standstill torque is the amount of torque an electric motor produces when it first starts from a standstill, i.e. zero RPM. The standstill motor torque is 9.7 Nm at 60K overtemperature and 110.9 Nm at 100K overtemperature. The standstill motor current is 7.85 Amps at 60K overtemperature and 9.75 Amps at 100K overtemperature. MS2N06-D0BRN-ASUG0-NNNNP-NN is a low-inertia motor with a rotor inertia of only 0.00065 kg m2. The main benefit of low motor inertia is faster acceleration and deceleration. Low inertia motors can respond quickly to changes in speed or direction, making them ideal for demanding motion control applications. Bosch provides different categories of motor encoders for the MS2N product line, ranging from basic to high-performance.

A basic performance encoder is installed on the MS2N06-D0BRN-ASUG0-NNNNP-NN motor. This is a singleturn variant with Hiperface, a high-performance communication protocol for connecting encoders to motion control systems. The motor shaft has a smooth design. A sealing ring on the shaft provides protection from environmental dust and moisture. With a sealing air connection>. and the shaft seal, the motor has an < protection rating. This means the motor housing provides full protection against dust ingress. Furthermore, the housing is protected against immersion in water up to 1 meter for 30 minutes. With self-cooling, the motor does not require additional cooling fans for dissipating heat. To identify the motor unit, operators can refer to information printed on the type plate. In addition to the serial number and type code, technical specifications are also printed on the type plate.