MS2N06-D0BNN-BSUG0-NNNN-NN Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
MPN: R911387838
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
The Bosch Rexroth Indramat MS2N06-D0BNN-BSUG0-NNNN-NN is part of the MS2N Synchronous Servo Motors series and features a rated speed of 3000 rpm with low rotor inertia. It has a singleturn Hiperface encoder, a smooth shaft with a sealing ring, and uses a self-cooling method with standard varnish in black.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The MS2N06-D0BNN-BSUG0-NNNN-NN is a synchronous servo motor produced by Bosch Rexroth Indramat as part of the MS2N Synchronous Servo Motors series. This motor is intended for precision industrial automation where coordinated motion profiles are required, such as multi-axis gantries, transfer units, indexing tables, and other servo-driven handling systems. By converting electrical input from a drive controller into controlled rotary torque, it provides the actuation needed to position tooling, conveyors, or process fixtures with repeatable accuracy.
The motor’s mechanical core uses a standard bearing matched to the MS2N06 frame size so radial and axial loads remain within predictable limits during normal operation. At a rated speed of 3000 rpm, the rotor reaches its nominal operating point, and the low inertia design helps reduce acceleration lag in dynamic axes. Heat is removed by surface radiation and convection because the housing is self-cooling, eliminating the need for external blowers. Electrical power and encoder feedback pass through M23/M17 rotatable connectors, allowing the cable outlets to be aligned with cabinet runs and machine clearances. A black RAL 9005 varnish covers the housing, and standard flange accuracy helps maintain concentric mounting. The D frame length provides additional active length within the same motor family while keeping the installation footprint compact.
Mounting follows the B5 / IM3001 pattern, and a PT1000 sensor in the stator monitors winding temperature during operation. The shaft has a smooth shaft with a shaft sealing ring to help block lubricant migration and reduce contaminant entry. The motor is supplied without a holding brake, so holding torque must be provided externally when the axis is at a standstill. Position data come from a single-turn absolute encoder that provides 128 signal periods per revolution and communicates with the drive over Hiperface. This feedback arrangement supports accurate rotor position detection during controlled motion and startup.
Frequently Asked Questions about MS2N06-D0BNN-BSUG0-NNNN-NN:
Q: What type of shaft is featured on the MS2N06-D0BNN-BSUG0-NNNN-NN motor?
A: The MS2N06-D0BNN-BSUG0-NNNN-NN servo motor is equipped with a smooth shaft and a shaft sealing ring for contaminant protection.
Q: How is the MS2N06-D0BNN-BSUG0-NNNN-NN motor cooled?
A: This model uses a self-cooling method, relying on natural convection without external cooling devices.
Q: What electrical connection type does the MS2N06-D0BNN-BSUG0-NNNN-NN offer?
A: The electrical connection on this motor utilizes a rotatable double cable connection with M23 and M17 connectors.
Q: What kind of encoder does the MS2N06-D0BNN-BSUG0-NNNN-NN use?
A: The MS2N06-D0BNN-BSUG0-NNNN-NN features a singleturn encoder with absolute position feedback for one revolution.
Q: Does the MS2N06-D0BNN-BSUG0-NNNN-NN come with a holding brake?
A: This servo motor does not include a holding brake as part of its standard configuration.
