MS2N06-D0BNN-BMUH0-NNNNN-NN
Wake Industrial LLC is not an authorized distributor of this product.
MPN: R911389614
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
The Bosch Rexroth Indramat MS2N06-D0BNN-BMUH0-NNNNN-NN is part of the MS2N Synchronous Servo Motors series and is equipped with a multi-turn absolute encoder, 16-bit. This servo motor delivers a rated power of 0.53 kW with a rated torque of 1.7 Nm. It features surface cooling and an IP65 protection rating.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The MS2N06-D0BNN-BMUH0-NNNNN-NN Servo Motor is powered by Bosch Rexroth Indramat. This motor is produced to serve industrial automation systems. It features a frame size 06 with a long body length marked as D. It uses a self-cooling system with natural convection classified as IC410. The mounting type is flange-mounted and complies with the IM B5 design.
An optical encoder is installed in the MS2N06-D0BNN-BMUH0-NNNNN-NN servo motor with ACUROlink 24-bit multiturn feedback. Its shaft is cylindrical with a key and follows the Type “L” specification. It does not include a holding brake in its construction. The encoder connector is positioned rear right and rotates by 90 degrees. The output power of the motor is measured at 2.63 kilowatts. The output torque generated under normal load is 8.5 newton-meters. The motor operating speed reaches up to 2960 revolutions per minute. The MS2N06-D0BNN-BMUH0-NNNNN-NN servo motor draws 5.6 amperes of continuous current under rated load. The maximum RMS current draw reaches 25.4 amperes during operation. The peak torque output is 34.8 Nm in the cold state. This peak torque output reaches 32.0 Nm at hot conditions. The standstill torque at 100K is rated at 11.9 newton-meters, while the standstill current at 100K is rated at 7.55 amperes.
The torque constant of the MS2N06-D0BNN-BMUH0-NNNNN-NN servo motor at 20°C delivers 1.70 Nm per ampere. Its coil resistance at 20°C is measured at 1.85 ohms. The motor winding inductance is specified at 18 mH. The internal capacitance is rated at 5 nF for this motor. The maximum allowed speed reaches 6000 revolutions per minute. It has a winding heating time constant of 38.6 seconds. The Total motor weight is 9.0 kg for installation purposes. The Shaft diameter and length of the motor are 24 millimeters and 50 millimeters, respectively. Its bolt circle diameter is 130 millimeters.
Frequently Asked Questions about MS2N06-D0BNN-BMUH0-NNNNN-NN:
Q: What benefits does the cylindrical shaft with key (Type L) offer in MS2N06-D0BNN-BMUH0-NNNNN-NN?
A: The Type L cylindrical shaft with key offers secure mechanical coupling. It prevents slippage under load and ensures reliable torque transmission.
Q: Why is IC410 natural convection cooling used in MS2N06-D0BNN-BMUH0-NNNNN-NN?
A: IC410 cooling allows self-ventilating operation, eliminating the need for external fans. This supports quieter performance and reduces maintenance requirements.
Q: How does the optical encoder improve feedback in MS2N06-D0BNN-BMUH0-NNNNN-NN?
A: The optical encoder ensures accurate multiturn position tracking, enhancing precision in dynamic motion control. It improves synchronization in advanced automation systems.
Q: Why is high rotor inertia advantageous in MS2N06-D0BNN-BMUH0-NNNNN-NN applications?
A: Higher rotor inertia contributes to smoother motion control. It aids in dampening rapid changes in speed, improving stability in automation setups.
Q: How does the M23 SpeedCon connector enhance connectivity in MS2N06-D0BNN-BMUH0-NNNNN-NN?
A: The M23 SpeedCon connector provides fast, tool-free cabling. It ensures tight and secure electrical connection even in high-vibration environments.
