MS2N06-D0BNN-AMUL0-NNNNN-NN
Wake Industrial LLC is not an authorized distributor of this product.
MPN: R914501756
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
The MS2N06-D0BNN-AMUL0-NNNNN-NN synchronous servo motor delivers a rated power of 0.6 kW, a rated torque of 1.9 Nm, a peak torque of 2.3 Nm, and a rated current of 1.16 A. Part of the MS2N Synchronous Servo Motors series by Bosch Rexroth Indramat, it features natural cooling and IP65 protection class.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
Delivered by Bosch Rexroth Indramat, the MS2N06-D0BNN-AMUL0-NNNNN-NN synchronous servomotor has no shaft seal around the keyway shaft. This motor is free of additional ground and sealing air connections. The product’s open conductors, type plates, and safety notes must be protected when additional varnish is applied. This device is manufactured using energy-optimized production processes. The unit has high metal content in its construction. Its operation must be stopped as soon as a running noise is heard. This motor has eight pins in each of its connectors.
The product’s output shaft is likely to get damaged because of impacts such as strikes on the shaft end. It must be cooled down completely before any maintenance or repair work is done on it. This motor uses M8 x 20 mounting screws with an 8.8 property class and compliance to DIN EN ISO 4762/4014 specifications for flange assembly. The product is highly recommended for dynamic applications because of its low inertia. This device’s threshold value for the warning temperature is set at 140 °C. The unit is connected with a power cable and an encoder cable. It portrays a 3K22 operating class according to DIN EN IEC 60721-3-3 specifications for permanent use.
This synchronous servomotor encounters vibrations in the form of sine-wave oscillations in stationary use. The product installation altitude should not exceed 3000 m above sea level. This device is compatible only with foreign converters that have a pulse frequency in the 4 kHz to 16 kHz range. The unit-related permanent magnets should be removed before its disposal. Its transportation locks have to be removed before it is commissioned.
Frequently Asked Questions about MS2N06-D0BNN-AMUL0-NNNNN-NN:
Q: How is the typical sound pressure level of the MS2N06-D0BNN-AMUL0-NNNNN-NN motor specified?
A: The typical sound pressure level of the MS2N06-D0BNN-AMUL0-NNNNN-NN motor is specified for a speed range of 0 rpm to the rated speed.
Q: How many times can the output direction of the connectors of the MS2N06-D0BNN-AMUL0-NNNNN-NN motor be changed?
A: The output direction of the connectors of the MS2N06-D0BNN-AMUL0-NNNNN-NN motor can be changed a maximum of 10 times.
Q: What kind of lifting equipment does the MS2N06-D0BNN-AMUL0-NNNNN-NN motor support?
A: The MS2N06-D0BNN-AMUL0-NNNNN-NN motor supports lifting eye bolts or lifting sling belts for lifting purposes.
Q: How does heat dissipation of the MS2N06-D0BNN-AMUL0-NNNNN-NN motor take place?
A: Heat dissipation of the MS2N06-D0BNN-AMUL0-NNNNN-NN motor takes place by natural convection and radiation to the ambient air.
Q: What position recording does the encoder of the MS2N06-D0BNN-AMUL0-NNNNN-NN motor offer?
A: The encoder of the MS2N06-D0BNN-AMUL0-NNNNN-NN motor offers absolute and indirect position recording.
