MS2N06-C0BTN-BMUH0-NNNNN-GM100N2050BN-NN

Product Description:

The MS2N06-C0BTN-BMUH0-NNNNN-GM100N2050BN-NN>. is a Bosch motor with one cable connection for power and feedback. This connection can be used with a cable of up to 75 meters in length. Having a single cable reduces installation and maintenance costs, as only one cable needs to be replaced if a cable fails. The cable connects to a rotatable < angle connector on the motor. This low inertia motor has a rotor inertia of only 0.00039 kg m2. Having low-inertia means the motor offers fast response to commands from the motor controller and also requires less energy to overcome the initial inertia. This provides energy-efficiency, leading to significant energy savings over the operating life of the motor. Standstill torque of the motor at 60K overtemperature is 6 Nm. Standstill torque of the motor at 100K overtemperature is 7.1 Nm.

Under high loads the motor can deliver 17.3 Nm peak output torque. The nominal motor speed is 4020 RPM and its maximum speed is 6000 RPM. The motor has a flange for mounting. Size of the flange is 116 millimeters. The manufacturer has designed it for self-cooling, which is another factor that reduces the overall power consumption associated with the motor. Protection category of the MS2N06-C0BTN-BMUH0-NNNNN-GM100N2050BN-NN motor is IP64. This is due to the fact that the shaft does not include a sealing ring. M2SN motors with shaft sealing rings have an improved rating of IP65. Multiple encoder options are available for MS2N motors. A standard performance optical multiturn encoder is installed on the MS2N06-C0BTN-BMUH0-NNNNN-GM100N2050BN-NN motor. It is rated for 128 signal periods and supports the Hiperface protocol. The motor is without a holding brake and weighs 6.4 kilograms.