MS2N05-D0BHN-CMSH0-NNNNE-NN
Wake Industrial LLC is not an authorized distributor of this product.
MPN: R914000562
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
The Bosch Rexroth Indramat MS2N05-D0BHN-CMSH0-NNNNE-NN is part of the MS2N Synchronous Servo Motors series, featuring a rated power of 0.5 kW. This servo motor boasts a nominal torque of 1.59 Nm and a maximum speed of 6000 rpm. It uses natural convection cooling and has an IP65 protection class.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The MS2N05-D0BHN-CMSH0-NNNNE-NN is a Bosch Rexroth MS2N series AC servo motor. To identify the motor, operators can refer to information lists on the nameplate on the motor housing. Ambient conditions for motor operation include 5 to 95% relative humidity, 0 to 40 degrees Celsius temperature, and 0 to 1000 meters altitude above sea level. The motor is ideally used with a Bosch Rexroth converter. Use with foreign converter is possible when its uses pulse width modulation and 4 to 16 kilohertz pulse frequency. The standard value for rate of voltage rise is less than or equal to 5 kilovolts per microsecond. The standard value for peak voltage is less than equal to 1.56 kilovolts. The motor has an integrated temperature sensor on its windings. This sensor must be connected to the converter for evaluation.
Motor repair can only be performed at a Bosch Rexroth authorized workshop. With derating, the MS2N05-D0BHN-CMSH0-NNNNE-NN motor can be used at up to 60 degrees Celsius ambient temperature. Its shaft does not feature a seal, and as a result, the motor housing is IP64 compliant. Speed rating of the motor windings is 2000 RPM. The motor cools via convection cooling. Other cooling options are available for MS2N motors. Different encoders are available, and this motor has a multiturn high-performance encoder with 20-bit resolution for high-precision feedback. A single cable connection with M23 connector handles motor power and motor feedback. This cable connector is rotatable. An additional grounding connection is provided on the housing of the MS2N05-D0BHN-CMSH0-NNNNE-NN motor. Standard bearings are used on the motor. A holding brake is not installed. Motor handling and installation and trained professionals is necessary for optimal performance.
Frequently Asked Questions about MS2N05-D0BHN-CMSH0-NNNNE-NN:
Q: What is the rated motor torque?
A: The rated torque is 7.55 Nm.
Q: Is a holding brake installed on the motor?
A: A holding brake is not installed on the motor.
Q: How many pole pairs does the motor have?
A: The motor has 5 pole pairs.
Q: How can you identify the motor?
A: A nameplate attached to the housing allows motor identification.
Q: What is the maximum motor speed?
A: The maximum motor speed is 6000 RPM.
