MS2N05-C0BTN-BMDH1-NNNNE-NN
Wake Industrial LLC is not an authorized distributor of this product.
MPN: R911384545
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
The Bosch Rexroth Indramat MS2N05-C0BTN-BMDH1-NNNNE-NN is a synchronous servo motor from the MS2N Synchronous Servo Motors series, featuring a flange size of 050 mm. It provides a continuous stall torque of 2.3 Nm and a maximum torque of 7.3 Nm. This motor includes a multi-turn absolute encoder and offers IP65 protection.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The MS2N05-C0BTN-BMDH1-NNNNE-NN Servo Motor of MS2N series has a flange mounted design that is commonly used in industrial automation and it also has a platinum resistance temperature sensor embedded in the windings. It is designed by Bosch to perform optimally at rated rotational speed of 4090 rpm which is determined under standardized test conditions.
The MS2N05-C0BTN-BMDH1-NNNNE-NN precision level of the mounting flange follows general tolerances and it incorporates a multiturn absolute encoder that is designed to track shaft position across 4096 full rotations without power. At room temperature it has high electromechanical efficiency of the torque generation as it produces 0.93 Nm/A. It is included with a round shaft that lacks keyways, grooves and it does not incorporates a shaft seal which means it is not safeguarded against the intrusion of dust, moisture or other contaminants at the shaft junction. It is fitted with standard rolling-element bearings, which are well-suited for most applications but not specialized to handle high axial forces, operate in vacuum conditions or withstand harsh or extreme environmental conditions. It comes with an encoder that has incremental resolution of 128 signal cycles per revolution, uses high-speed digital protocol and is compliant for safety-critical systems under functional safety standards.
The MS2N Series Motor rotor possesses a low moment of inertia which indicates it can change its rotational speed quickly and it can also accelerating and decelerating with ease. It can safely withstand 30.2 amperes current either for brief periods or under certain operational conditions which ensure safe and reliable performance. It demands 56.3 volts for every 1000 revolutions per minute which is essential for fine-tuning the drive system and performing calculations related to energy regeneration and dynamic response.
Frequently Asked Questions about MS2N05-C0BTN-BMDH1-NNNNE-NN:
Q: How does the multiturn encoder in the MS2N05-C0BTN-BMDH1-NNNNE-NN enhance positional accuracy?
A: The multiturn encoder tracks the motor’s position across 4096 revolutions, ensuring precise feedback. This feature allows for high accuracy, even after power loss or interruptions.
Q: Why is the low rotor inertia important in the MS2N05-C0BTN-BMDH1-NNNNE-NN servo motor?
A: Low rotor inertia allows for fast acceleration and deceleration, enhancing dynamic response. This is essential for applications requiring rapid changes in speed.
Q: What benefits does the 0.93 Nm/A torque constant provide in the MS2N05-C0BTN-BMDH1-NNNNE-NN motor?
A: The 0.93 Nm/A torque constant ensures efficient torque production at low current levels, maximizing energy efficiency. This reduces heat generation and optimizes the motor’s performance.
Q: Why does the MS2N05-C0BTN-BMDH1-NNNNE-NN motor lack a shaft seal?
A: The motor's lack of a shaft seal makes it less protected against contaminants. This design choice may be suitable for environments where dust and moisture exposure are minimal.
Q: How does the encoder's compliance with SIL2 and PL d safety standards benefit the MS2N05-C0BTN-BMDH1-NNNNE-NN motor?
A: The SIL2 and PL d ratings ensure the motor meets high safety standards. This is crucial for operating in safety-critical systems where failure could cause significant harm or damage.
