MS2N05-C0BTN-AMDG1-NNNNN-NN

Product Description:

The MS2N05-C0BTN-AMDG1-NNNNN-NN is a cost-effective synchronous servomotor manufactured and engineered by the Rexroth Group of companies. Derived and released under the MS2N product line, this servomotor is equipped with a basic hiperface encoder that can track the number of elapsed revolutions with respect to a reference time period. Aside from its accurate motor encoder, this machine also employs a standard blocking brake that works at a terminal voltage of 24 V. Most holding brakes for servomotors, such as the MS2N05-C0BTN-AMDG1-NNNNN-NN operate in hold-only mode. In this operating mode, the brake ensures that the rotor remains in a stationary position until a trigger signal is received.

At 20 degrees Celsius, the MS2N05-C0BTN-AMDG1-NNNNN-NN follows an approximately linear torque and voltage constant. Specifically, at this temperature, it is possible to increase the motor’s torque output by 0.93 Nm per one ampere increase in its input current. Similarly, at 20 degrees Celsius, every 1000 rpm increase in the shaft speed increases the terminal voltage of this motor by 56.3 V. For AC servo motors, the torque and voltage constants provide a good estimate of the performance and output capabilities of the machine during operation. In total, the MS2N05-C0BTN-AMDG1-NNNNN-NN has five pole pairs, or ten poles, mechanically separated by 36 degrees.

At rated terminal voltage, the MS2N05-C0BTN-AMDG1-NNNNN-NN achieves a shaft speed of 4000 rpm. For high-speed applications, the MS2N05-C0BTN-AMDG1-NNNNN-NN can safely be operated at a peak speed of 6000 rpm. For high-torque applications, on the other hand, the machine can safely be used to deliver a peak torque of 20.8 to 22.6 Nm, depending on the ambient conditions. With its blocking brake, this original product from Bosch Rexroth weighs a total of 7 kilograms.