MS2N05-C0BNN-AMDG0-NNNNN-NN

Product Description:

MS2N05-C0BNN-AMDG0-NNNNN-NN is a MS2N series Bosch Rexroth servo motor. It is a synchronous motor, which is a type of motor whose speed is synchronized to the frequency of the power supply current. The motor has two connectors: one for motor power and one for feedback. The connectors are M17 rotatable connectors that allow flexibility in wiring and cable connection. The MS2N05-C0BNN-AMDG0-NNNNN-NN is equipped with a standard performance multiturn encoder. The main function of the MS2N's encoder is to measure motor shaft speed and position, which supports hiperface. Measurements made by the encoder are sent to the motor controller, where control algorithms take feedback into consideration when determining the controller output. Windings on the MS2N05-C0BNN-AMDG0-NNNNN-NN motor are rated for 3000 RPM. Bosch has designed the motor for self-cooling.

This means that the motor dissipates heat to the surrounding air without requiring cooling fans or blowers. The smooth shaft on the servo motor is fitted with a sealing ring. This ring improves ingress protection, and improves the motor’s protection rating to IP65. An optional holding brake is not installed on the motor. However, operators can order holding brakes for motors if required. Standard bearings are used on the motor. The housing of the motor unit is protected by a standard varnish. Weight of the motor is 5.9 kilograms. Peak electrical/mechanical speed of the motor is 6000 RPM. Number of pole pairs on the motor is five. The rotor inertia of this low inertia motor is 0.00029 kg m2. At 60K overtemperature, the torque and current at standstill are 6.1 Nm and 3.53 Amps. The motor requires professional installation and maintenance by qualified and trained staff.