MS2N05-B0BTN-ASDH1-NNNNN-NN
Wake Industrial LLC is not an authorized distributor of this product.
MPN: R911390658
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
The MS2N05-B0BTN-ASDH1-NNNNN-NN synchronous servo motor features a rated torque of 3.7 Nm, a peak current of 11.5 A, and natural cooling without a fan. Part of the MS2N Synchronous Servo Motors series by Bosch Rexroth Indramat, it provides a rated power of approximately 0.95 kW and operates at a rated speed of 3000 rpm.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The MS2N05-B0BTN-ASDH1-NNNNN-NN is a compact and reliable industrial motion unit manufactured by Bosch Rexroth Indramat for use in industrial application. This motor unit is classified under the IP65 protection category. The housing unit of this motor design makes it possible for the unit to withstand interference like dust and water splashes. When this motor unit is at standstill, the input current requirement for this industrial motor is about 4.55 amperes, at this current, the motor produces a standstill torque of 3.75 millimeters and reaches a speed of about 6000 revolutions per minute. There are a total of five pole pairs present in this motor unit; these pole pairs offer several advantages, including smoother torque supply and a reduced commutation voltage.
The MS2N05-B0BTN-ASDH1-NNNNN-NN motor design is covered by a one-layer standard varnish that is water resistant and has a RAL 9005 jet black color. This motor unit features a permanent magnet holding brake which operates according to the electrically released closed-circuit principle. The number of operating circuits of this holding brake is greater than 5,000,000. It is also important for operators to note that the integrated brakes are not operational brakes that can be used for the deceleration of the motor when it is in operation. The brake retains the load connected to the motor shaft during standstill operation.
The MS2N05-B0BTN-ASDH1-NNNNN-NN is equipped with an internal temperature sensor that allows the controller to keep track of the internal heat in the motor housing. The sensor allows controllers to shut down the motor when there is a risk of overheating. The motor warning temperature is 140 degrees, while its disconnection temperature is about 145 degrees Celsius. The flange on the MS2N05-B0BTN-ASDH1-NNNNN-NN is similar to DIN 42948
Frequently Asked Questions about MS2N05-B0BTN-ASDH1-NNNNN-NN:
Q: How does the MS2N05-B0BTN-ASDH1-NNNNN-NN maintain its low inertia?
A: The low inertial of this motor unit is due to the special material used in the design of its housing unit.
Q: Is the painting covering this motor chemically resistant?
A: Yes. The housing coating is able to withstand chemicals like dilute acids, water, sea water and mineral oil.
Q: Is the MS2N05-B0BTN-ASDH1-NNNNN-NN delivered with connection cables?
A: Connection cables are not included in the delivery package of the MS2N05-B0BTN-ASDH1-NNNNN-NN as a standard. However they can be ordered separately.
Q: What is the best mounting position for the MS2N05-B0BTN-ASDH1-NNNNN-NN?
A: The MS2N05-B0BTN-ASDH1-NNNNN-NN should be mounted indoors. It should not be exposed to extreme temperature and humidity levels.
Q: What is the service life of the ball bearings in the MS2N05-B0BTN-ASDH1-NNNNN-NN?
A: Ball bearings integrated into the MS2N05-B0BTN-ASDH1-NNNNN-NN have a service life of between 20,000 to 30,000 hours.
