MS2N05-B0BNN-BSDK0-NNNNN-NN

Product Description:

The MS2N05-B0BNN-BSDK0-NNNNN-NN synchronous servomotor crafted by Bosch Rexroth is deployed exclusively for industrial use. This motor cannot be used without an appropriate drive controller. The product has a standard design. This device is not to be operated in areas with a risk of an explosion. The unit encompasses a centering hole on its output shaft for fitting transmission elements. It must be worked on only after ensuring that it is in the standstill state. This motor’s plug connectors must neither be connected nor disconnected under load.

The product comprises M17 connectors for the power and encoder connections. This device is connected with the manufacturer’s readymade cables. The unit’s connectors have a SpeedCon lock and an adjustable torque of 2 Nm to 10 Nm. It should be transported and stored only in the horizontal position. This motor’s live parts must be covered when working on it. The product housing has a hot surface during and immediately after use. This device may have insufficient heat dissipation through the ambient air if the cooling fins are covered partially. The unit’s protective conductor connection should be inspected for firm seating and proper condition at regular intervals and replaced if needed. It must be stored with its protective covers reattached to the shaft and flange socket.

This motor is manufactured using energy-optimized production processes. The product fails to run if its supply voltage is missing. This device’s availability is largely affected by the lifetime of the bearing. Its alignment and coaxially are measured in the vertical orientation. This synchronous servomotor uses an aluminum plate for operating with 60K data.