MS2N05-B0BNN-BSDH0-NNNNN-NN
Wake Industrial LLC is not an authorized distributor of this product.
MPN: R914501666
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
The Bosch Rexroth Indramat MS2N05-B0BNN-BSDH0-NNNNN-NN is part of the MS2N Synchronous Servo Motors series and features a naturally cooled design. It has a rated power of 550 Watts and a peak torque of 5.1 Nm. The motor achieves a rated speed of 4000 rpm and operates with an IP65 protection class.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The Bosch Rexroth Indramat MS2N05-B0BNN-BSDH0-NNNNN-NN synchronous servomotor operates in a drive system with a drive controller. This motor is prone to shaft damage due to strikes. The product incorporates two independently operating systems to monitor its temperature. This device is to be transported after determining its weight and using the appropriate lifting equipment. The unit’s cables must be visually checked to see that they are free of damage after a storage period of more than a month. It has no hazardous substances that may be released with normal use. This motor has no shaft sealing ring.
The product portrays an IP 64 protection class according to EN 60034-5 specifications. This device is compatible with GTE and GTM series gearboxes. The unit and the drive elements must be adapted to each other to avoid exceeding the load limits. Its alignment, runout, and concentricity are specified in the flange accuracy. This motor has a N tolerance class. The product has bearings in both the drive end and the non-drive end. This device is characterized by a mean speed of less than or equal to 3500 min-1. The unit allows installation either vertically or horizontally. It can be coated with an extra layer of paint of no more than 40 µm thickness.
This synchronous servomotor’s noise emission is affected by the installation situation. The product uses a 350 x 350 x 30 mm (L x W x H) steel plate on operation with 100K data. This device tends to trigger property damage because of thermal overload. The unit portrays a controlled 3 x 400 to 400 V DC bus line voltage when its connection is established with an IndraDrive controller. Its permanent magnets must be demagnetized before the motor is disposed.
Frequently Asked Questions about MS2N05-B0BNN-BSDH0-NNNNN-NN:
Q: Where are the threshold values of the motor temperature monitoring MS2N05-B0BNN-BSDH0-NNNNN-NN stored?
A: The threshold values of the motor temperature monitoring MS2N05-B0BNN-BSDH0-NNNNN-NN are stored in the encoder data memory.
Q: How does the heat dissipation of the MS2N05-B0BNN-BSDH0-NNNNN-NN motor take place?
A: The heat dissipation of the MS2N05-B0BNN-BSDH0-NNNNN-NN motor takes place through radiation and natural convection.
Q: What kind of shaft end does the MS2N05-B0BNN-BSDH0-NNNNN-NN motor have?
A: The MS2N05-B0BNN-BSDH0-NNNNN-NN motor has a cylindrical shaft end with a frontal centering hole as per DIN 748-3 specifications.
Q: What is the bearing life of the MS2N05-B0BNN-BSDH0-NNNNN-NN motor?
A: The bearing life of the MS2N05-B0BNN-BSDH0-NNNNN-NN motor is 20,000 operating hours.
Q: How can the MS2N05-B0BNN-BSDH0-NNNNN-NN motor be installed vertically?
A: The MS2N05-B0BNN-BSDH0-NNNNN-NN motor can be installed vertically with the shaft facing upward or downward.
