MS2N04-D0BQN-CSSK1-NNNNN-NN
Wake Industrial LLC is not an authorized distributor of this product.
MPN: R911388446
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
The MS2N04-D0BQN-CSSK1-NNNNN-NN Servo Motor is manufactured by Bosch Rexroth Indramat. This motor has a winding of 4,000 min with a Single-turn encoder design. This motor is Equipped with a holding brake, it has a Keyway, with shaft seal shaft, and a M23 Single-Cable connection, turnable electrical connection.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The MS2N04-D0BQN-CSSK1-NNNNN-NN servo motor from Rexroth Indramat comes with high torque output along with high speed output and also a holding brake, featuring a Hiperface-enabled encoder, all in a compact design that makes this motor portable and easy to install. This motor comes with a nominal speed rating of 3320 rpm with a proportional torque of 3.85 Nm at this very speed, along with a current draw of 2.12 amperes. When used in locked rotor configuration, also known as standstill mode, the MS2N04-D0BQN-CSSK1-NNNNN-NN generates 4.65 Nm of torque with a current draw of 3.48 amperes.
This servo motor has a torque constant is 1.48 Nm per ampere of current and has a voltage constant of 89.9 volts per 1000 rpm of speed. The MS2N04-D0BQN-CSSK1-NNNNN-NN comes with 5 pole pairs, where each pole is responsible for generating the necessary electromagnetic field using the 3-phase input voltage supply of 475 volts AC at nominal. Each phase, which is 120 degrees apart, also generates electromagnetic field phasors that are also 120 degrees apart. The input voltage to this servo motor comes with a frequency rating of 50 to 60 Hz.
The holding brake on this motor comes with a holding force of 5 Nm and supports a maximum speed of 6000 rpm at which it is able to hold the motor shaft from spinning. The motor holding brake also requires 24 volts DC to operate and has a current rating of 0.63 amperes, which is not much, ensuring less strain on the supply of the motor that is operating both the holding brake and the motor encoder. The variable DC supply of this servo motor is able to operate the 7 to 12 volts DC encoder on this motor that comes with a 128-pulse period Hiperface protocol.
