MS2N04-D0BQN-CMSL0-NNNNN-NN
Wake Industrial LLC is not an authorized distributor of this product.
MPN: R911383922
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
The MS2N04-D0BQN-CMSL0-NNNNN-NN Servo Motor is manufactured by Bosch Rexroth Indramat. This motor has a winding of 4,000 min with a Multiturn encoder design. This motor is Not Equipped with a holding brake, it has a Keyway, no shaft seal shaft, and a M23 Single-Cable connection, turnable electrical connection.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The MS2N04-D0BQN-CMSL0-NNNNN-NN is not just another servo motor, it's a precision-engineered synchronous powerhouse built to deliver absolute synchronization between rotor and stator fields. This motor guarantees stable speed, sharp positioning accuracy, and consistent torque, even under fluctuating loads and high dynamic cycles. The ambient operating temperature for the motor ranges from 0 degrees C to +40 degrees C under full nominal performance. Operation is still possible up to 60 degrees C but requires derating (reduced performance). For storage and transport, the motor can safely withstand temperatures between -25 degrees C and +70 degrees C, provided they are protected against condensation and mechanical stresses. In terms of mounting, the motor is typically installed using a flange mounting system.
The MS2N04-D0BQN-CMSL0-NNNNN-NN unit incorporates 5 pole pairs, ensuring optimized magnetic performance. The torque constant at 20 degrees C is measured at 1.48 Nm/A, and the voltage constant is 89.9 V/1000 min. The peak speed of the motor is 6000 rpm both electrically and mechanically. In terms of electrical properties, the motor's winding resistance at 20 degrees C is 4.87 ohms, while the winding inductance is approximately 24.5 mH. The shaft is balanced with a half key without a shaft sealing ring. The cooling mode of the motor is a self-cooling mode, and the electrical connection is a single cable connection with a rotatable M23 connector.
Additionally, the leakage capacitance of the component stands at 3.24 nF, ensuring stable operation with minimal parasitic effects. Thermal time constants are also notable, measuring at 44 seconds for the winding and 18.5 minutes for the entire motor. The mass of the MS2N04-D0BQN-CMSL0-NNNNN-NN motor is approximately 4.7 kg with a rotational inertia of 0.00016 kgm2. The motor is built with a B5 flange-mounted design in accordance with PT1000 thermal sensor standards, ensuring precise temperature monitoring and mechanical compatibility.
