MS2N04-D0BQN-CMSH0-NNANN-NN
Wake Industrial LLC is not an authorized distributor of this product.
MPN: R911382870
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
The MS2N04-D0BQN-CMSH0-NNANN-NN Servo Motor is manufactured by Bosch Rexroth Indramat. This motor has a winding of 4,000 min with a Multiturn encoder design. This motor is Not Equipped with a holding brake, it has a Smooth, no shaft seal shaft, and a M23 Single-Cable connection, turnable electrical connection.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The MS2N04-D0BQN-CMSH0-NNANN-NN is a synchronous motor and as it is also servo, it incorporates feedback mechanisms that enable precise control over its position and velocity. This combination makes it a highly capable solution for demanding automation and motion control systems. The machine has low rotor inertia characteristics. The encoder is advanced with 20-Bit, ACURO Link (SIL2, PL d), whereas the multi-turn encoder design. The encoder has revolutions of 4096 absolute whereas the electrical connection is M23 single cable connection.
The MS2N04-D0BQN-CMSH0-NNANN-NN output-driven shaft is smooth to tackle reverse operation issues, and it has no sealing rings attached to it. The shaft shape is cylindrical with a frontal centering hole with DS thread. The motor has a winding thermal time constant of 44 seconds, indicating how quickly the winding temperature responds to changes in load, and a winding resistance of 4.87 ohms, which affects the current flow and heat generation during operation. The MS2N04-D0BQN-CMSH0-NNANN-NN operates most efficiently within an ambient temperature range of 0 degrees C to 40 degrees C, but it can function at temperatures up to 60 degrees C with performance derating, meaning its output may be reduced to prevent overheating.
At 20 degrees centigrade, the voltage and torque constant are 89.9 V per 1000 rpm, and 1.48 Nm/A respectively. This machine has no holding brake to stop via the rotor, the mass of this motor is just 4.7 kg. The standstill torque and current at 60K are 3.85 Nm, and 2.86 A respectively. As the temperature rises, these characteristics change to 4.65 Nm, and 3.48 A respectively. It has 10 poles with the maximum torque under cold constraints of 19.7 Nm. At warm conditions, the maximum torque shift to 18.1 Nm with the maximum current of 17.3 A.
