MS2N04-D0BQN-BMDG1-NNNNN-NN
Wake Industrial LLC is not an authorized distributor of this product.
MPN: R911384391
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
The MS2N04-D0BQN-BMDG1-NNNNN-NN Servo Motor is manufactured by Bosch Rexroth Indramat. This motor has a winding of 4,000 min with a Multiturn encoder design. This motor is Equipped with a holding brake, it has a Smooth, with shaft seal shaft, and a M17 Double Plug, turnable electrical connection.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The MS2N04-D0BQN-BMDG1-NNNNN-NN is equipped with compact, high-efficiency designs with short coil heads that minimize energy loss while enhancing torque and rotational speed. Field-weakening operation paired with IndraDrive controllers extends the torque-speed range beyond usual voltage limitations, optimizing the servomotor’s performance and long-term cost savings in the industry.
The design of the MS2N04-D0BQN-BMDG1-NNNNN-NN servomotor has a 95mm hole circle, a 50mm centering shoulder, and 6.6mm fastener holes. It is also equipped with a holding brake as well as a smooth seal-covered shaft. The current rating for the motor is 0.63A with 24 volts operating it. It takes 30ms to connect (at max) while 45ms to disconnect (at max). The holding brake’s moment of inertia is a fixed 451x10-7kg*m2. Also, the dynamic braking torque value for this motor stands at a suitable 4.5Nm. The motor provides a 3.85Nm standstill torque and utilizes 2.86A of current (at 60K). It is rated for 3320 RPM, while the maximum speed attainable is almost 2x, dependent on electrical and mechanical parameters. At 100K, the rated torque and current are 2.65Nm and 2.12A, respectively. The motor provides a power output of 0.92kW.
With the ability to reach current levels over 17A, this servomotor exhibits torque ranging from 19.7Nm at its coldest to 18.1Nm at its warmest. Comprising 5 pole pairs, it delivers a torque constant of 1.48Nm/A. The voltage constant is 90V per 1000 revolutions per minute at 20°C. This motor doesn't necessitate external cooling and is characterized by low rotor inertia. With an RPM winding of 4K and a BASIC 128-signal-duration 4096-cycle Hiperface encoder, it’s linked via an M17 connector with 2 plugs. Constructed with a precise flange and typical bearings, the motor unit MS2N04-D0BQN-BMDG1-NNNNN-NN has a standard dark varnish on it.
