MS2N04-D0BQN-BMDG1-NNNNE-NN
Wake Industrial LLC is not an authorized distributor of this product.
MPN: R911396785
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
The MS2N04-D0BQN-BMDG1-NNNNE-NN Servo Motor is manufactured by Bosch Rexroth Indramat. This motor has a winding of 4,000 min with a Multiturn encoder design. This motor is Equipped with a holding brake, it has a Smooth, with shaft seal shaft, and a M17 Double Plug, turnable electrical connection.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The MS2N04-D0BQN-BMDG1-NNNNE-NN model simplifies and accelerates drive configuration, mirroring real-world operation for optimal application-specific design. Characterized by an 82mm flange with 1mm length and a 20mm-long shaft, this servomotor incorporates a 95mm bolt circle along with a 50mm centering collar and 6.6mm mounting apertures.
There’s a holding brake to be found in this model; it has a holding torque of 5Nm, operating at a voltage of 24V and drawing 0.63A. 400J is the energy that can be extracted from this motor at max. Also, the maximum connection and disconnection times are 30 and 45 milliseconds, respectively. The shaft is smooth, covered by shaft covering. When the temperature settings are at 60 Kelvin, this motor’s current draw is between 2.80A and 2090A. The speed of 3.3k revolutions per 60 seconds maintained by this motor becomes 6000rev/min when it’s working at its highest capacity. The current value is 2.12 amperes when the temperature rises to 100K.
The unit MS2N04-D0BQN-BMDG1-NNNNE-NN has a power of 0.920 kilowatts while the maximum current it can draw is over 17A. It has a 5-pole-pair design coupled with a torque constant that remains below the value of 1.50Nm/A. The wires used in this motor’s windings depict a value of 5 Ohms with which they’re resisting the flow of current. Showcasing a low moment of inertia, the thermal constant is between 43s and 45s. Moreover, this unit doesn’t require external elements for cooling. It also features a 4,000 RPM winding and a BASIC 128-signal Hiperface encoder. An encoder with 4,096 cycles and a turnable dual-plug connector are also integrated into its construction. The MS2N04-D0BQN-BMDG1-NNNNE-NN also displays a very dark finish, producing a glaze of RAL 9005, along with regular bearings and an archetypal flange-mount design.
