MS2N04-D0BQN-ASDK1-NNNNN-NN

Product Description:

MS2N04-D0BQN-ASDK1-NNNNN-NN is a robust Bosch Rexroth servo motor with a singleturn encoder for real-time feedback. It comes in an IP65 rated housing which allows motor use for a wide range of applications in diverse operating environments. The motor shaft has a keyway and is balanced with a half-key. The sealing ring installed on the motor shaft improves ingress protection to safeguard motor bearings and improve motor performance and reliability. The motor supports self-cooling and should be operated in environments where the ambient temperature is below 40 degrees Celsius. MS2N04-D0BQN-ASDK1-NNNNN-NN is low-inertia motor with windings rated for 4000 RPM. The singleturn encoder provides basic performance. If required, operators can order encoders with standard or advanced performance with higher resolutions. The motor has a double-cable connection with two rotatable M17 connectors.

An electrically-released holding brake is installed to prevent accidental and unintentional motor shaft rotation. The motor has a standard flange with holes for mounting screws. A standard varnish coating is applied to the motor surface for environmental protection. The standstill motor torque at 60K overtemperature is 3.85 Nm and the standstill current is 2.86 Amps. The standstill motor torque at 100K overtemperature is 4.65 Nm and the standstill current is 3.48 Amps. Speed rating of the MS2N04-D0BQN-ASDK1-NNNNN-NN motor is 3320 RPM. The rated torque, current and power for the motor are 2.65 Nm, 2.12 Amps and 0.92 kilowatts. The peak current rating is 17.3 Amps and the peak motor speed is 6000 RPM. There are five pole pairs on the servo motor. Voltage constant for the motor is 89.9 Volts/1000 RPM. The torque constant is 1.48 Nm/A at 20 degrees Celsius. With the holding brake, the motor weighs 5.4 kilograms.