MS2N04-D0BQN-ASDK0-NNNNN-NN

Product Description:

MS2N04-D0BQN-ASDK0-NNNNN-NN is a Bosch Rexroth servo motor from the MS2N product line. Relevant product data is listed on the type plate attached to the motor housing. This type plate must be checked at delivery to verify motor specifications. Surface of the motor gets hot during operation and presents a safety hazard to operators. Therefore, the motor should be allowed to cool down before any activity is performed on it. Only trained staff should perform electrical connections on the motor. Opening of terminal boxes is only allowed when the motor is powered off. The shaft must be protected from strikes. Operators must ensure the shaft is not subjected to excessive radial and axial loads. Without derating, the MS2N04-D0BQN-ASDK0-NNNNN-NN can be operated at temperatures of up to 40 degrees Celsius. With derating, it can be operated at up to 60 degrees Celsius.

The main shaft includes a keyway and a shaft sealing ring. Because of the shaft seal the motor housing complies with IP65 protection class. This means the motor is fully dustproof and safe from water ingress. This makes the motor an optimal choice for a wide range of applications and operating environments. The motor supports self cooling. Its housing features a flange for secure mounting. The maximum altitude at which the motor can be used without derating is 1000 meters. The sin/cos 1 Vss single turn encoder is based on capacitive technology. An optional holding brake is not installed on the device. Size of the motor flange is 82 millimeters. The shaft diameter is 14 millimeters and its length is 30 millimeters. Diameter of the four mounting holes on the flange is 6.5 millimeters.