MS2N04-D0BHN-CSSK1-NNNNN-NN
Wake Industrial LLC is not an authorized distributor of this product.
MPN: R911388444
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
The MS2N04-D0BHN-CSSK1-NNNNN-NN Servo Motor is manufactured by Bosch Rexroth Indramat. This motor has a winding of 2,000 min with a Single-turn encoder design. This motor is Equipped with a holding brake, it has a Keyway, with shaft seal shaft, and a M23 Single-Cable connection, turnable electrical connection.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The MS2N04-D0BHN-CSSK1-NNNNN-NN is an MS2N synchronous servo motor that is a 3-phase permanent magnet servo motor. This servo motor is IC410 certified, which allows it to self-cool under the ambient temperature where this servo motor is mounted. The mounting of this AC servo motor can be performed on a compatible flange of size 83 mm wide, similar to DIN 42948. Since this servo motor comes with a holding brake, its total weight is approximately 5.7 kg. The holding brake on this servo motor is responsible for locking the shaft in a particular position of interest with a force of 5 Nm and can be electrically engaged with an operating voltage of 5 volts DC, along with a current of 0.63 amperes. The connection time for the brake is 40 ms, while the disconnection delay is around 130 ms, keeping safety in mind.
The oscillating quantity level for this servo motor is Level A (EN 60034-14) up to the rated speed, which is 2040 rpm. With this particular vibration limit, the MS2N04-D0BHN-CSSK1-NNNNN-NN is able to absorb most of the vibrations caused by the attached load to this servo motor. The maximum mounting altitude of this servo motor is 1000 meters above sea level before causing the servo motor to derate. Under derated operating conditions, this servo motor rotates at the speed of 500 rpm.
This motor comes with a speed rating of a maximum of 6000 rpm mechanically and has a maximum electrical speed of 4000 rpm. The average rated torque of this servo motor is 3.85 Nm, while the maximum torque limit of this servo motor is 19.7 Nm, but only if the temperatures of this servo motor are below 20 degrees Celsius.
