MS2N04-D0BHN-CSSH1-NNNNN-NN
Wake Industrial LLC is not an authorized distributor of this product.
MPN: R914502737
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
The MS2N04-D0BHN-CSSH1-NNNNN-NN Servo Motor is manufactured by Bosch Rexroth Indramat. This motor has a winding of 2,000 min with a Single-turn encoder design. This motor is Equipped with a holding brake, it has a Smooth, no shaft seal shaft, and a M23 Single-Cable connection, turnable electrical connection.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
With an average speed of rotation of 2040 rotations per minute and a nominal rotational torque of 3.85 Nm, the MS2N04-D0BHN-CSSH1-NNNNN-NN is a good choice for a servo motor that provides high speed and high torque output. This motor, at higher temperatures, is able to generate a maximum torque of 18.4 Nm, while at colder temperatures below 20 degrees Celsius, it can generate a total torque of 19.7 Nm with a current draw of 9.7 amperes at maximum.
This motor is able to rotate at a maximum speed of 6000 rotations per minute, and to counter the vibrations caused by such high speed of rotation, the MS2N04-D0BHN-CSSH1-NNNNN-NN comes with an all-reinforced body design that is able to absorb vibrations to a certain extent, allowing the servo motor to operate with greater efficiency. The vibration severity grade for this servo motor is R. Since this servo motor relies heavily on self-cooling with the help of ambient air, the manufacturer, Rexroth, recommends installing this servo in an area with high ventilation and an environmental temperature range between 0 to 45 degrees Celsius.
The motor comes with a single M23 cable that is rotatable, making it easier to wire this servo motor, regardless of its mounting direction, since the cable can be rotated easily. The servo features a 5 Nm electrically released holding brake that stops the shaft from moving and keeps it fixed as long as the brake is engaged. The brake requires around 24 volts DC to operate and draws around 0.63 amperes of current. It can be used as long as the speed of the motor is less than or equal to 6000 rpm.
