MS2N04-D0BHN-BSDH0-NNNNN-NN
Wake Industrial LLC is not an authorized distributor of this product.
MPN: R911388558
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
The MS2N04-D0BHN-BSDH0-NNNNN-NN Servo Motor is manufactured by Bosch Rexroth Indramat. This motor has a winding of 2,000 min with a Single-turn encoder design. This motor is Not Equipped with a holding brake, it has a Smooth, no shaft seal shaft, and a M17 Double Plug, turnable electrical connection.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
Bosch Rexroth introduced a synchronous servo motor MS2N04-D0BHN-BSDH0-NNNNN-NN variant that allows accurate and constant speed control. This machine has a base speed of 2040 rpm, and under mechanical constraints, the machine can run up to 6000 rpm. It has 5 pole pairs with the mass of the machine of 4.7 kg. The variant has no additional blocking brakes, and the maximum current drawn capacity running at maximum speed is 9.7 A. The machine has a rotor moment of inertia of 0.00016 kgm2. The standstill torque of the machine is 3.85 Nm at 60 K with a standstill current of 1.61 K. However, the values increase at 100K and shift to 4.65 Nm and 1.96 A for standstill torque and current.
Similarly, the maximum torque value behaves differently for different temperatures. At 100K, the maximum torque of the machine can be observed at 19.7 Nm, whereas the same characteristics at 20C correspond to the value of 18.1 Nm. The machine MS2N04-D0BHN-BSDH0-NNNNN-NN has an electrical connection with double connection speedcon locking with rotatable output direction, and the type of connection is M17 power. The driven shaft of the MS2N04-D0BHN-BSDH0-NNNNN-NN is plain, and it has no holding brakes.
The machine lacks a special design and other designs like additional grounding connection or sealing air connection. The installation altitude must be above 1000m sea level, and permanent use of the motors is possible when the specified class 3K22 according to DIN EN IEC 60721-3-3. The leakage capacitance of the component causes a small amount of current to leak through what should be an insulating path, and this machine has 2.95 nF which is comparatively very low. The motor has class F insulation that has the potential to withstand high temperatures.
