MS2N04-D0BHN-BMDL0-NNNNN-NN
Wake Industrial LLC is not an authorized distributor of this product.
MPN: R911396444
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
The MS2N04-D0BHN-BMDL0-NNNNN-NN Servo Motor is manufactured by Bosch Rexroth Indramat. This motor has a winding of 2,000 min with a Multiturn encoder design. This motor is Not Equipped with a holding brake, it has a Keyway, no shaft seal shaft, and a M17 Double Plug, turnable electrical connection.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The MS2N04-D0BHN-BMDL0-NNNNN-NN is a synchronous servo motor with low inertia and high torque. It has self-cooling, and the rated velocity is 2040 rpm at 100K temperature. The encoder design is multi turn with an absolute revolution type, and the revolution in this variant is 4096. The motor has thermal time constant of the winding of 44 sec, whereas the mass of the machine is 4.7 kg. The electrical connection is through a double cable connection with M17, and the configuration is rotatable. The encoder performance of MS2N04-D0BHN-BMDL0-NNNNN-NN is standard, and the signal period is 128 with Hiperface (SIL2, PL d).
The maximum electrical speed is 4000 rpm, but mechanically, the machine can run up to 6000 rpm. It has 5 number of pole pairs, whereas the motor has winding inductance is 77.27 mH. The driven shaft of the machine is keyway (half key balancing), and no additional sealing rings are available in this variant. Holding brakes are absent in this machine, and it has standard flange exactness along with standard bearings.
The thermal time constant of this variant MS2N04-D0BHN-BMDL0-NNNNN-NN is 18.5 minutes with the leakage capacitance of the component of 2.95 nF. The winding resistance is 15.8 ohm, and it is a measure of how much the wire coils impede the flow of electric current through them at 20 C. The voltage constant is the relationship between the motor's back EMF (generated voltage) and its speed, and this machine has 159.1 V per 1000 rpm at 20 C. The standstill torque of the machine tested at 60K is 3.85 Nm. The design of MS2N04-D0BHN-BMDL0-NNNNN-NN is B5, PT 1000, and the coating on the motor housing is standard varnish RAL 9005 black.
