MS2N04-D0BHN-BMDH0-NNNNN-GE080N1010AN-NN
Wake Industrial LLC is not an authorized distributor of this product.
MPN: R911410554
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
The MS2N04-D0BHN-BMDH0-NNNNN-GE080N1010AN-NN Servo Motor is manufactured by Bosch Rexroth Indramat. This motor has a winding of 2,000 min with a Multiturn encoder design. This motor is Not Equipped with a holding brake, it has a Smooth, no shaft seal shaft, and a M17 Double Plug, turnable electrical connection.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The MS2N04-D0BHN-BMDH0-NNNNN-GE080N1010AN-NN is a synchronous servo motor that offers a torque constant of 2.62 Nm, or torque per ampere of current consumed. This servo motor requires approximately 179 volts AC nominal to operate with a 3-phase input configuration needed to power up 5 pole pairs within this motor, ensuring smooth and high-speed rotation. The current draw by this servo motor is between 1.63 amperes for low power mode all the way up to 9.7 amperes for its maximum operating mode.
To ensure smooth rotation of the shaft towards the desired angle and position, the MS2N04-D0BHN-BMDH0-NNNNN-GE080N1010AN-NN comes with a multiturn encoder. This encoder, when it rotates, emits a square wave pulse whenever a segment or an increment is detected. The pulse is a 5-volt square wave feedback signal that gets sent to the motor control module, which then calculates both the current position of the shaft as well as the required increments to move the shaft to the requested position. This encoder is a multiturn encoder capable of performing a total of 4096 revolutions.
This servo motor comes with a natural convection cooling option, hence a cooling blower fan or liquid cooling is not required, making the entire design noise-free and keeping the noise rating below 70 dB. The motor should always be operated within an operation temperature range between 0 degrees Celsius to 40 degrees Celsius, along with a maximum humidity range of 95%. The thermal time constant rating for this servo design is 18 minutes, allowing this motor to rapidly adjust its temperature, especially when it comes to high-speed heavy-duty mode, where this motor is able to rotate at the maximum speed of 6000 rpm, generating a lot of heat.
