MS2N04-C0BTN-CMSK0-NNNNN-NN
Wake Industrial LLC is not an authorized distributor of this product.
MPN: R911384267
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
The MS2N04-C0BTN-CMSK0-NNNNN-NN Servo Motor is manufactured by Bosch Rexroth Indramat. This motor has a winding of 6,000 min with a Multiturn encoder design. This motor is Not Equipped with a holding brake, it has a Keyway, with shaft seal shaft, and a M23 Single-Cable connection, turnable electrical connection.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
AC electrically powered motors are either induction or synchronous, and the MS2N04-C0BTN-CMSK0-NNNNN-NN is a servo motor with the same rotor and stator speed. The machine has no holding brakes and is equipped with a multi-turn encoder. It has no special design and the electrical connection is through a single cable connection with rotatable output directions. When the machine is running at a peak speed of 6000 rpm, the maximum current it can take from the electrical system is 17.3 A. It has universal bearings in it, and the encoder performance is 20-bit ACUROLINK. The motor has class F insulation and it is better among other classes due to its capacity to withstand high temperatures.
The permissible operating ranges of MS2N04-C0BTN-CMSK0-NNNNN-NN for ambient temperatures of 0 C to 40 C. The concentricity of the machine can have standard tolerance N as per DIN 42955 and optional tolerance R as per DIN 42955. This machine has an alignment of standard tolerance, and the output shaft is half keyway referring to half of the slot needed to fully accommodate a key. The motor has a shaft sealing ring to prevent the leakage of fluids or gases.
The thermal time constant of the winding is 35.3 seconds with 16 minutes of the complete motor's thermal time constant. It is the time it takes for servo motor temperature to change by 63 percent. The mass of the machine is 3.7 kg, and the rated power consumption of the MS2N04-C0BTN-CMSK0-NNNNN-NN is 0.68 kW. The continuous torque at a standstill is 2.8 Nm, and the torque constant is 0.98 Nm/A. The leakage capacitance of the motor's components is 1.8 nF, whereas the voltage constant is 59.8 V per 1000 revolutions per minute at 20 degrees centigrade.
