MS2N04-C0BTN-CMSK0-NNNNE-NN
Wake Industrial LLC is not an authorized distributor of this product.
MPN: R914000838
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
The MS2N04-C0BTN-CMSK0-NNNNE-NN Servo Motor is manufactured by Bosch Rexroth Indramat. This motor has a winding of 6,000 min with a Multiturn encoder design. This motor is Not Equipped with a holding brake, it has a Keyway, with shaft seal shaft, and a M23 Single-Cable connection, turnable electrical connection.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
AC motors are categorized by the rotor and stator speed, and in synchronous motors they run at the same speed. It is a synchronous motor powered by AC current and variant of a servo motor by Indramat Rexroth. The MS2N04-C0BTN-CMSK0-NNNNE-NN has a rated speed and a max speed of 3900 rpm and 6000 rpm. This model is unique as its design has an additional grounding connection. The electrical connections of the servo motors of Indramat Rexroth are made via plug connectors or terminal boxes. The electrical connection mode is a single cable with the type of connection of M23. The electrically locking is SpeedCon and the output direction is rotatable.
The output direction of the power connector and the encoder connector can be adjusted. The encoder is multi-turn with 4096 increments. The peak speed is limited by mechanical factors such as bearing type, and this machine MS2N04-C0BTN-CMSK0-NNNNE-NN has standard bearings. The construction design is IM B5 with PT1000 temperature sensors for thermal overloads. There are two modes of operation, continuous operation S1, and periodic intermitted operation S3. The cooling mode of the motor is self, and the additional grounding design has a preassembled motor connection cable (with PE conductor) that can be used for the grounding concept at the machine as per DIN EN 60204-1.
The machine MS2N04-C0BTN-CMSK0-NNNNE-NN has 5 north and 5 poles and the continuous current of the machine at 60 K and 100 K is 3.11 A and 3.9 A respectively. In a similar context, the continuous torque of the servo motor at 60 K and 100 K are 2.8 Nm and 3.5 Nm respectively. It clearly shows that these factors increase in values under high-temperature motor operations. The motor has standard flange exactness as per DIN 42948.
