MS2N04-C0BTN-CMSH0-NNNNN-NN
Wake Industrial LLC is not an authorized distributor of this product.
MPN: R911383925
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
-
Available
The MS2N04-C0BTN-CMSH0-NNNNN-NN Servo Motor is manufactured by Bosch Rexroth Indramat. This motor has a winding of 6,000 min with a Multiturn encoder design. This motor is Not Equipped with a holding brake, it has a Smooth, no shaft seal shaft, and a M23 Single-Cable connection, turnable electrical connection.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The MS2N04-C0BTN-CMSH0-NNNNN-NN from Rexroth is part of the MS2N04 lineup of Asynchronous servo motors. This AC servo motor comes in small and compact sizes with a flange size of 82 mm and a shaft length of 11 mm. The motor at standstill conditions can generate a torque of rating 2.8 Nm while demanding a current draw of 3.11 Amperes ensuring an efficient torque output based on the current consumption. The torque constant ratio for this servo motor is 0.98 Nm per ampere of current but this is only valid if the temperatures of the servo motor is between 0 and 20 degrees Celsius.
This servo motor comes with a maximum torque rating of 13.05 Nm for temperatures up to 20 degrees Celsius while for temperatures more than 20 degrees Celsius, the servo motor can generate up to 12 Nm of torque. This servo motor comes with a low rotor inertia of 0.00011 kgm² that allows this servo to respond to changes very quickly allowing it to go from stationary to high speeds in a matter of milliseconds. This motor has a rated speed of 3900 rpm while the maximum speed rating of this servo is 6000 rpm.
This motor comes with a winding resistance of 3.5 ohms, allowing a lot of current and power to flow through the motor coil generating higher levels of power output. The inductance of the winding for this motor is around 17.35 mH which makes sure that the winding is able to suppress any kind of high-frequency electrical spikes within the input supply to the servo motor. The maximum frequency range allowed for this 5-pole servo motor is between 50 to 60 Hz allowing for it to be compatible with various power systems.
