MS2N04-C0BNN-HMSK1-NNNNN-NN
Wake Industrial LLC is not an authorized distributor of this product.
MPN: R911394547
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
MS2N04-C0BNN-HMSK1-NNNNN-NN is a Bosch Rexroth motor from the MS2N Synchronous Servo Motors. Its speed rating is 3230 RPM. The motor features a holding brake and a multi turn encoder.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
MS2N04-C0BNN-HMSK1-NNNNN-NN is an industrial servo motor. It is designed for applications that require closed loop control that uses feedback and allows precise motor control. A multi turn encoder with 20-bit resolution is installed on the motor. The motor must be used with a compatible Bosch motor controller. A single cable connecting the motor to the controller carries power from the controller to the motor and feedback from the motor to the controller. This connection has a rotatable and circular M23 connector. The MS2N04-C0BNN-HMSK1-NNNNN-NN motor supports convection cooling. It requires ambient temperatures below 40 degrees Celsius and site elevations below 1000 meters for rated output. At 40 degrees Celsius and 3000 meters elevation, the motor output derates by 14%. At 60 degrees Celsius and 1000 meters elevation, the motor output derates by 22%.
At 60 degrees Celsius and 3000 meters elevation, the motor output derates by 33%. The motor shaft has 14 millimeters diameter. It includes a keyway and shaft sealing ring. The shaft is balanced with a half key. A 5 Nm holding brake is installed on the motor. This holding brake has an emergency stop function for securing the shaft at standstill. The brake operates according to the electrical release principle and works at 24 Volts DC. The brake must have a direct connection to the Bosch motor controller. A benefit of using MS2N motors with Bosch controllers is that these controllers have a protective circuit that switches inductive loads of the holding brake. Weight of the MS2N04-C0BNN-HMSK1-NNNNN-NN motor, including the brake, is 4.4 kilograms. Ingress protection rating of the servo motor is IP65. Its rated speed is 3230 RPM and its maximum speed is 6000 RPM.
Frequently Asked Questions about MS2N04-C0BNN-HMSK1-NNNNN-NN:
Q: How is the motor shaft balanced?
A: The motor shaft is balanced with a half key.
Q: What is the benefit of the shaft seal?
A: The shaft seal improves ingress protection and protects motor components.
Q: How many revolutions can the encoder distinguish?
A: The encoder can distinguish 4096 revolutions.
Q: What is the maximum encoder current consumption?
A: The maximum encoder current consumption is 60 milliamps.
Q: What is the voltage supply range for the encoder?
A: Voltage supply range for the encoder is 7 to 12 Volts.
