Product Description:

The MS2N04-C0BNN-CMSG1-NNNN-NN is a synchronous servo motor in the MS2N Synchronous Servo Motors series. It is intended for closed-loop speed and position control in automated transfer lines, pick-and-place gantries, and coordinated multi-axis machines. In these applications, it provides repeatable motion while keeping the compact dimensions associated with the MS2N04 motor size. The motor also uses standard bearings, a C-length frame, and a black RAL 9005 varnish coating for installation in typical industrial equipment.

The motor operates at a rated speed of 3000 rpm, allowing direct coupling to moderate-speed loads without external gearing. Thermal management relies on self-cooling, so airflow around the housing is sufficient for continuous duty without an auxiliary blower or liquid circuit. Power, feedback, and brake conductors are routed through a single rotatable M23 cable connection, which reduces wiring bulk and allows the connector to be oriented after installation. Position data are supplied by an advanced 20-bit ACURO®Link encoder, providing 1,048,576 counts per revolution to the drive. The encoder also supports multi-turn absolute tracking over 4,096 revolutions, so the motor can retain position information even after power is removed.

A size 1 electrically released holding brake secures vertical or load-bearing axes when power is off and disengages when excitation is applied. Rapid acceleration is supported by a low-inertia rotor, which helps reduce drive energy during frequent start-stop cycles. For ingress protection at the output, the motor uses a smooth shaft with a shaft sealing ring, allowing integration with couplings or gearheads without a keyway. The motor also uses B5 / IM3001 flange mounting with PT1000 temperature monitoring, so the flange follows IEC mounting dimensions while the embedded sensor reports winding temperature to the drive.