MS2N04-C0BNN-BSDL0-NNNNN-NN
Wake Industrial LLC is not an authorized distributor of this product.
MPN: R911393531
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
The MS2N04-C0BNN-BSDL0-NNNNN-NN Servo Motor is manufactured by Bosch Rexroth Indramat. This motor has a winding of 6,000 min with a Single-turn encoder design. This motor is Not Equipped with a holding brake, it has a Keyway, no shaft seal shaft, and a M17 Double Plug, turnable electrical connection.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
With a torque constant of 1.74 Nm per ampere of current consumed, the MS2N04-C0BNN-BSDL0-NNNNN-NN from Rexroth Indramat is one of their most efficient synchronous servo designs as it has a low power consumption rate, drawing a maximum current of 9.7 amperes while having a power rating of 0.81 kW. This motor, when consuming a maximum current of 9.7 Amperes, produces a maximum torque of 13.05 Nm thanks to its efficient coil design that has a coil resistance of 1.12 ohms along with an inductance of 0.71 mH, which is perfect for smoothing out spikes within the supply voltage needed to energize the poles of this servo motor. This motor comes with a 5-pole configuration.
In the case of heavy-duty operation mode, the MS2N04-C0BNN-BSDL0-NNNNN-NN servo motor comes with a self-cooling option, where the servo motor uses the ambient temperature to cool itself. The motor's aluminum enclosure acts as a heatsink, and with the help of convection, ensures the motor enclosure remains cool, transferring the temperature to the motor coil to ensure the internals of the motor remain cool as well.
The MS2N04 motor is primarily compact and relies on a flange mounting system to mount this motor. This particular motor size supports a flange of size 82 mm and can support a maximum altitude of 1000 meters above sea level. If the motor follows derated operating conditions, it will generate a derating speed of 1000 rpm instead of the rated nominal speed of 3230 rpm. Operators are always recommended to install this motor in a well-ventilated room to ensure a good flow of air, and this motor should always be operated within an operational temperature range between 0 to 40 degrees Celsius.
