MS2N04-B0BTN-BMDK0-NNNNN-NN
Wake Industrial LLC is not an authorized distributor of this product.
MPN: R911398691
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
The MS2N04-B0BTN-BMDK0-NNNNN-NN Servo Motor is manufactured by Bosch Rexroth Indramat. This motor has a winding of 6,000 min with a Multiturn encoder design. This motor is Not Equipped with a holding brake, it has a Keyway, with shaft seal shaft, and a M17 Double Plug, turnable electrical connection.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The Bosch Rexroth MS2N04-B0BTN-BMDK0-NNNNN-NN synchronous servomotor is balanced with a half key. This motor has an extended torque speed range over the voltage limit with field weakening operation. The product portrays minimum space requirements and less installation work. This device has no integrated fan. The unit incorporates form-locking torque transmission with low requirements on its shaft-hub connection. Its output shaft encompasses a DS M5 centering hole.
This motor is balanced with a 5 x 5 x 20 matching key. The product is free of any holding brake. This device has a N tolerance class. The unit has a water-based jet black standard varnish on its housing. Its ball bearing is lubricated with high-temperature grease. This motor uses a steel plate without thermal insulation when it operates with 100 K data. The product can withstand a high load based on the ON time during periodic intermittent operation. This device is protected against overload by thermistors in its windings. The unit is manufactured using resource-optimized production processes. Its S1 operating curves at 100 K represent the motor winding limits during continuous operation.
This motor encounters heat dissipation by heat radiation to the ambient air. The product should be lifted only in the horizontal orientation. This device must be attached to the machine using all the mounting holes. The unit is prone to damage because of impacts on the output shaft. Its connectors can be rotated a maximum of 10 times. This synchronous servomotor should be connected with the manufacturer's readymade cables.
